There's a mobile version of our website.
I have to do an install from scratch and was looking for some basic suggestions for the configuration. I have a 5508 that I have to tie into 6509.
I have to stand up 16 - 1042 model APs. I'll be supporting numerous clients - barcode scanners, phones, iphones and laptops with WPA2. I will have to build 2 WLANs - one for DATA and for a hotspot.
Does anyone have a base configuration they can share for both the WLC and the 6509 configuration? Does anyone have a "from scratch" build process doc they could share? Does anyone have a recommended code version ?
I've downloaded the 7.0 Configuration Guide but was hoping to get some real world guideance also.
Well, starting from the version, 7.0 is the latest so it is good to start from it.
Initial set up of 5508:
I would advise you to read carefully this section where explains the details, and best practice to configure the WLCs ports and interfaces.
Regarding config guides, I would advise you to go through the design guide:
And the configuration examples:
They are valid for all models of WLC.
They are the basis of the configuration and very good examples.
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion