There's a mobile version of our website.
I have two N5K (5020) switches with NX-OS - 5.0(3)N2(1).
These two switches form VPC domain: peer-link = 2*10Gb ports (1/17-18) and peer-keepalive link over managements ports.
Also I have two HP servers with two 10 Gb ports on each server.
Each server conected by one link to each N5K switch (1/9-10). N5K downlinks configured as access ports with LACP Active mode.
There is only one VLAN (1).
When "no shut" command entered on N5K access ports - ports going in "not connected" status, begin flap and then going in "linkFlapErrDisabled" state.
In attach - "sh run" from N5K.
Please help to troubleshoot this problem.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion