There's a mobile version of our website.
we would like to connect a Cat4500E+ using the SFP+ twinax cable (SFP-H10GB-CUXXX) in length 3-5 (passive) and 7-10 (active) meters to the following modules:
- WS-X4606-X2-E with CVR-X2-SFP10G
and I've noticed that only the 1-5 meters are supported with IOS 12.2(54)SG respectively 3.2.0XO...are the length of 7-10 not supported???
Moreover are these SFP+ Twinax supported on HP Servers? Anyone has already in place a solution like this one?
Thanks for the suggestions...
I've not tried the 4500E Sup7 connections, so cannot help there.
However I have connected a WS-C4500X-16 running 15.0(1r) SG and 03.04.00.SG into HP DL360 Gen8 servers using the following:
Both adapters came up without any problems. I would stay away from the Active TwinAx though.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion