There's a mobile version of our website.
Below are default inactivity connection time out for A3(1.0) So by defult any tcp connection(http or https) will be timed out in an hour.
The defaults are as follows:
Was this change in the A4(2.0) code or is it still the same? I heard a TAC engg say that default inactivity timeout for http and https are now 5 mins that is 300 seconds.
The 3600 seconds for TCP apply just for TCP ports different than https and http, you can see that while you are configuring the parameter map in the description, but please take a look at the command reference:
This has been like this since the initial codes.
So it does apply for A4(2.0) and all other codes, including the old ones.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion