There's a mobile version of our website.
Hi I create a package in SCABB with CIR=0, PIR=3500 kbps to have bandwith control over a range of IP address in a csv file directly applied on SCE. but when i review SCA reporter Bandwith service per package, I see 4000Kbps and more in this package. Why the PIR is not working??
client1, 220.127.116.11/24, 5
Package in SCABB:
CIR = 0
PIR = 3500
Is this production environment or lab?
What kind of traffic passing through the SCE?
(Num of flows, src IPs, TCP/UDP, applications, etc.)
One possible explanation for this is that since the traffic control
starts only after the classification is completed, those pre-classified
traffic is not controlled. This is usually not a problem but some P2P
protocols may require many packets to be inspected to classify and
if there is a heavy P2P user, the traffic for the user may exceed the PIR
I think you can check which protocol is exceeding the PIR by looking
at the report which you realized the issue.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion