There's a mobile version of our website.
i have 12 locations all connected to internet via T1 and connected to HQ via VPN all sites have asa 5505 and HQ has asa 5510
we are adding another building at a site and it will have an asa5510 with its own internet connection. VLAN 1 that is behind this new asa5510 will be connected to one of the site's VLAN1. the VLANs that will be behind this new asa5510 will all be guest (apparements 1 VLAN per appartemnt)
the internet connection will be a 100Mbps connection.
now i think that is all the basic info so here is my quetion i want to setup the 5508 at HQ so we can deploy wireless at all sites including the appartmens.
is this possable? i want to have all appartment traffic to go to their asa5510 internet not through HQ
You can setup the AP's at the remote site for H-REAP/FlecConnect. This will allow you to say, ssid 1 (internal users) connect back to HQ, ssid 2 (guest) you get placed on the remote site vlan X.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion