There's a mobile version of our website.
Good evening all,
I recenly acquired a Cisco 881W ISR Router for use at home. I eventually want to use it for VPN access to my home lab, but before I can do any of that I have to get my initial configuration working.
I had a couple of goals in mind for my initial config:
I based my configuration off of the following web page:
I am having a couple of problems with my setup.
Attached are the configs of the R1-881W (router-side) and the AP-881W (AP-side), along with some output from debugging:
Ok, so I went back and re-did my configuration putting everything that was in Vlan11 into Vlan1. This seemed to be the only thing that would work. So I have to use Vlan1 then it seems. Interesting.... Please tell me if I am wrong.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion