There's a mobile version of our website.
Guys I need help. Ill be really grateful.
I am trying to make MoH Live feed work connecting an FXO port to an iPod or any device.
But for some reason we tried using a device from ebay which is this http://www.ebay.co.uk/itm/3-5MM-AUDIO-PLUG-TO-RJ11-CAT5-CABLE-EXTENDER-DEVICE-50M-/330334917421?pt=UK_Sound_Vision_Other&hash=item4ce97ed32d
Does anyone know how to make it work.
Using an analog E&M port as the live-feed MOH interface requires the minimum number of external components. You connect a line-level audio feed (standard audio jack) directly to pins 3 and 6 of an E&M RJ-45 connector. The E&M voice interface card (VIC) has a built-in audio transformer that provides appropriate electrical isolation for the external audio source. An audio connection on an E&M port does not require loop-current. The signal immediate and auto-cut-through commands disable E&M signaling on this voice port. A G.711 audio packet stream is generated by a digital signal processor (DSP) on the E&M port.
If you use an FXO port as the live-feed MOH interface, connect the MOH source to the FXO port using a MOD-SC cable if the MOH source has a different connector than the FXO RJ-11 connector. MOH from a live feed is supported on the VIC2-2FXO, VIC2-4FXO, EM-HDA-3FXS/4FXO, EM-HDA-6FXO, and EM2-HDA-4FXO.
if this helps, please rate
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion