There's a mobile version of our website.
I recently configured an WLC5508 but I have trouble to get the LAP's connected.
The model of the controller is AIR-CT5508-K9 V02 with software version 184.108.40.206
I have 3 LAP's AIR-LAP1141N-E-K9 (1x V06 and 2x V03) to test my config.
On the V03 LAP I get an error when loading the configuration. On the V06 when unpacking the image. I have attached the output of the LAP's and the config of the WLC as txt files. On a WLC2504, the LAP's perform fine.
Did I missed something in the config or is there a problem with my WLC?
Any help is greatly appreciated as I am struggling with this for about 2 weeks an I need to go live with this within a few days.
The output during the entire bootup sequence of the WAP is not complete.
1. Please post the entire bootup sequence of the WAP.
2. Please post the output to the command "sh inventory".
Thank you for your replies.
Hereby the requested outputs. I would like to try the FUS update but I am not able to download the image at this moment. If someone could get me this image, I can give it a try.
I would upload 220.127.116.11 and also make sure you upload the FUS image 18.104.22.168. Did you upload the FUS image at all or did the WLC come with 7.2? You can verify that the image has been uploaded by issueing this command:
You will see the following if it was upgraded:
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 22.214.171.124
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Do you not have smartnet on that wlc? If you do, you should be able to unless its not added to your account. If you can't download it, maybe look at using 126.96.36.199.
Sent from Cisco Technical Support iPad App
For follow up. TAC Case opened. FUS upgrade failed due to write error to flash.
TAC engineer decided unit is defective and issued a replacement unit. I'll get back with results.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion