There's a mobile version of our website.
I've been told by the local ISP to change the MTU for our DSL connection to internet to 1500 to avoid possible problems .
Is it true ?
Do I have to set it to 1500 on both ethernet and DSL interfaces ?
A MTU Size of 1500 is the physical Maximum of Ethernet. DSL use Ethernet (A DSL ist often Ethernet or ATM).
So it is OK if you set the MTU on both sides to 1500.
But normally this should be set by default.
May you take a look with
"sh int eth0" there you will find the actual MTU-Size
which is set.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion