There's a mobile version of our website.
Quick question: If a PRI has been ordered and provisioned to use ISDN protocol "NI-1" what does this correspond to when configuring the "isdn switch-type ????" command on the PRI?
Do I use "isdn switch-type primary-ni"?
TIA for any assistance
Hi, according to this document there is no NI-1 standard for PRI only for BRI!
Might be worth checking with your telco what has been provisioned again.
If it is a PRI it may just be a typo with the 1 and you would configure isdn switch-type primary-ni
If its a BRI you would configure isdn switch-type basic-ni.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion