About matthew-morse

matthew-morse · 06-07-2012

Hi All,I'm looking for some help configuring an MDS9509 running SAN-OS v3.1.2a with a MDS9148 (SN6000C) running NX-OS v5.0.1a.I have two available ports on the existing SAN MDS9509 and would like to port-channel them to the NEW MDS9148 (SN6000C).Does...

matthew-morse · 02-09-2012

Hi All,I have a MDS9509 with port channels going to my Cisco blade switches on my HP Proliant blade enclosure.I have NO ports left on my MDS9509, but DO have some remaining on the blade enclosure.The question is, can i port channel from the blade enc...

matthew-morse · 06-05-2012

Kris,Regarding the port channel configuration.1) When I port channel off of the MDS9509 with two ISL's. Should I use two different blades on the 9509 or is ok to use a single blade with two open ports?2) Since I believe my new edge switch (SN6000) wi...

matthew-morse · 02-15-2012

Thanks Kris,This is good information that I can use to determine how I’m going to implement this SAN and the new 9148 switch.Matt

matthew-morse · 02-10-2012

Kris,Does that make sense?I have Fabric_A Core1 to Blade1, Fabric_B Core2 to Blade2.I'm asking if I can add a separate edge switch (9148) to each Fabric?Core1 to Blade1 then to Edge1Core2 to Blade2 then to Edge2Or do I need to port channel off of the...

matthew-morse · 02-10-2012

Kris,This is what I currently have keeping in mind I have two separate fabrics.. Four ports for each switch. Core1 Core2 |||| |||| Blade Switch1 Blade Switc...

Member Since	‎02-09-2012 02:46 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

MDS9509 & MDS9148 (SN6000C)

Port Channel Best Practice

Re: Port Channel Best Practice

Re: Port Channel Best Practice

Re: Port Channel Best Practice

Re: Port Channel Best Practice