The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
How do I contact aol desktop gold.net Email support by phone? {+1} -888 -986 {}-6414{}To contact aol desktop gold.net Email support by phone, simply dial their toll-free number: +1-888-986-6414 [aol desktop gold] This will connect you with a aol desk...
How do I contact aol gold.net Email support by phone? {+1} -888 -986 {}-6414{}To contact aol gold.net Email support by phone, simply dial their toll-free number: +1-888-986-6414 [aol gold] This will connect you with a aol gold.net Email who can assis...
Hello team,i need a suggestion how to solve this question.I have a customer HQ that have to reach a customer end-point accross two links one main and other in paralllel active as bakup .The problems is that they use two workstations 1 and 2 that must...
Good morning I am facing the following problem on a customer location with main and backup router. cisco ISR4331/K9 We see constant incoming IHQ packets on the WAN Interfaces on both routers. At the same time there is almost no traffic on the WAN Int...
I have an ASR1001-x with a single 10G interface to a switch on the LAN. I cannot pass traffic from the sub interface subnets to AWS network connected on WAN. The Lan interface subnet 192.168.50.0/23 passes traffic correctly. the other two do not. Can...
Hi ,I have configured the packetfence according to guide , but when i go to connect the SSID. its directly connect and reach the internet and not redirected toward web auth page.i cant find any logs and anything else to troubleshoot. pls check my con...
Hi Experts, Im deploying NDFC for greenfield network. In resource tab its asking below, i don't know what this will be used for , should i keep it default value or I need to put some vlan and need to reserve it .* Network VLAN RangePer Switch Overlay...
Afternoon All,I am currently working on a Site-2-Site VPN at home I have connected a cable between both Outside Interfaces. It's been a while since I have done this on an ASA5505. I have this little voice telling me there is an issue with the differe...
Hello Bros'I have a question regarding Cisco UCS system with specs as mentioned below:UCS manager 3.1(3b)Chassis 5108Ucs FI 6248upIO module 2208xpDue to creticality I wanted to consult you regarding changing the IP addressing used in the management a...
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
HejI have performed a local install, but I can not login to the GUI using admin/admin.I can login to CLI with "ncs_cli -C -u admin" , but when I do "show run", all I see is snmp configuration on the device. I can not see AAA or configure it.cisco@Ubu...
Getting below error whenever I try to upgrade to 7.2.7 from 7.2.5. We've removed a lot of stuff, but still it says not enough disk, are possibly hitting a bug? ****************** FAILURE SCRIPT: 1 ***********************************[240502 12:10:36:8...
Hi,I want to secure one LAN port of my CBS350-48P switch. It is located to PoE camera outside the building.It would be great to shut down the port, if another device is put into this port.How can this be solved?Best regards,Heinz