Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919197members
1223322discussions

Community Activity

How To Connect with Allegiant Air? {{(@✈☎️Support)}}

How can I speak to an Allegiant Air representative fast?Talk to someone on Allegiant Air smoothly, give their dedicated support line a ring at + ퟏퟖퟎퟓ ퟑퟎퟗ ퟗퟑퟕퟕ . Take your time and listen carefully to the automated prompts, then share all the required...

How Do I Communicate With Live Person At American? Quick~Guide

헔헺헲헿헶헰헮헻 헔헶헿헹헶헻헲's phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ퟭ-ퟴퟬퟰ-ퟮퟱퟭ-ퟴퟴퟴퟲ // ퟭ-ퟴퟬퟰ-ퟮퟱퟭ-ퟴퟴퟴퟲ. Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones that are ...

Resolved! PSA: Avoid CBS350 Switches - Critical POE Defect

Hello Community, I'm writing to let you know that there is a critical POE defect in the CBS350 switches and you should avoid them if you require stable POE operations. This apparent software defect causes POE ports to randomly fault after 8 to 12 hou...

d0nni3q84 by Level 1
  • 18065 Views
  • 48 replies
  • 0 Helpful votes

Resolved! Refreshing APIC-L2's with APIC-L4's

Hello all,I'm trying to make sure I understand the procedure for refreshing our current L2 APIC's with our new L4 APIC's.Currently our fabric is running 5.2(4) , and the new L4 APIC's require either 5.3 or 6.0.5 (which has just come out and is what w...

vv0bbLeS by Level 1
  • 78 Views
  • 3 replies
  • 1 Helpful votes

802.1x on NX Servers with clients

Hello,I've been planning to role out dot1x on my network. However, the network consists of NXServers in the DC with thin clients that connect back them at user desks.As I think about it, how would dot1x work in this environment? Connecting a PC to a ...

DamianRCL by Level 1
  • 2 Views
  • 0 replies
  • 0 Helpful votes

Dhcp server with vlan's

Hello, I can't manage to give the connected PCs an ip through the dhcp server. My packet tracer + network design are attached. Have currently only started on the bottom part so it's only about the bottom PCs.Thanks in advance for the effort

TS40 by Level 1
  • 21 Views
  • 0 replies
  • 0 Helpful votes

Cisco ACS - 802.1x Radius Issue

I have a less then a dozen Cisco 3850 switches that I am working on.  I need to configure 802.1x authentication.  The issue is the switches are reaching out to Cisco ACS and I need to set up radius server to enable 802.1x.  The Cisco ACS I found out ...

John N by Level 1
  • 201 Views
  • 6 replies
  • 0 Helpful votes

WLC 9800-40 Disable IPv6

Hello  everybody,  sb know, how to disable IPv6 (CLI) on WLC9800-40? SW 17.4.1 IOS-XE Bengaluru. GUI Global Config do not works.  Thanks a lot. 

CUIC - Total Talk Time

Hello all, Quick bit of background on this, the way our contact center currently works is that they have 1 line on their phones which they take both direct calls and calls via CSQ's. They have a few reports that they are using at the minute that incl...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: