Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1920368members
1225426discussions

Community Activity

ISE 3.2 patch-4 to patch-5

I have the following SNS-3655 running ISE 3.2 patch-4:ise1: Primary Admin/Primary MNT;ise2: Secondary Amdin/Secondary MNTise3: PSNise4: PSNI would like to do the followings:- patch ise1 to patch-5; reboot- patch ise3 to patch-5; rebootAfter one week:...

Modify Cisco 9130 Syslog Message Format on 9800 WLC

Hello everyone,I have rather specific question about syslog on 9130 aps. I would like to activate syslog on the access points. We have a Redhat Rsyslog, and my colleague mentioned he's having some difficulties, if the syslog string doesn't include th...

Resolved! Log analytics with elk for monitoring reports

In Ise version 3.3 there is a feature of System 360 that includes Monitoring and Log Analytics, with elk monitoring , I want to fetch the radius accounting logs for the last 90 days.  Will this feature be able to fetch logs of last 90 days and if not...

SIP outbound call Disconnect Cause=47

Hello all, We started having issues with outbound calls with a SIP provider. This below is the call flow: CUCM -> SIP Trunk -> Voice gateway -> SIP Trunk -> Provider On the voice gateway, I'm getting a disconnect cause=47. Viewing the logs, it seems ...

SIP outbound call Disconnect Cause=47

Hello all. We started having issues with outbound calls with a SIP provider. This below is the call flow: CUCM -> SIP Trunk -> Voice gateway -> SIP Trunk -> Provider On the voice gateway, I'm getting a disconnect cause=47. Viewing the logs, it see...

Translator by Community Manager
  • 123 Views
  • 4 replies
  • 0 Helpful votes

Control third-party peripherals via serial port

HelloI would like to control a Sony projector with a macro from a codec (RoomOS 11.15.1.0) via RS-232 (outbound). The Power-On command is: "\xA9\x17\x2E\x00\x00\x00\x00\x3F\x9A" (all HEX) But the codec sends out the following: \xC2\xA9\x17\x2E\x00\x0...

mv1 by Level 1
  • 174 Views
  • 4 replies
  • 0 Helpful votes

Cisco + Splunk: It's a new day for your data.

We’re excited to share that Splunk is now part of Cisco, enabling our customers to use their data in more powerful ways. Cisco + Splunk: Learn more. Just added: Executive Roundtable on the Future of Cisco and Splunk webinar on April 4th, 2024 | 10 AM...

US-ENG_IA-12_0_1200x628_BAN-S_JPEG_TOFU-no-B2P-SplunkWebinar-All_0_VISIT_6.JPEG.jpg CiscoSplunk-Community-600x300.jpg
Sabah Kadir by Community Manager
  • 2851 Views
  • 75 replies
  • 21 Helpful votes

CISCO ASR 1002 with burnt bootflash

I have a Cisco-ASR 1002 sitting idle for a long time, because the flash memory, which starts the operating system, burned out, does anyone know if there is a way to change it? And if you could send me the link to the product to purchase, I would appr...

Expressway C & Edge license

Hello,In the process of upgrading from 12.5 to 15 Su1. Expressway C and Edge are part of the current 12.5 environment. Also, my account is part of a smart account. From what I remember we did not need any Expressway license. It's not even listed unde...

Cannot get to skills for all dashboard

Hi everybody, yesterday 31.08 I have got an issue, after logging in through my Cisco account a gray page loading screen appears and the loading ring spins endlessly. I tried to log in through other browsers, tried with vpn, tried to open through priv...

Blixtet by Level 1
  • 586 Views
  • 2 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: