Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919439members
1223753discussions

Community Activity

Same OSPF area with multiple ABR

HiCould someone verify if the topology (attached) is feasible? It involves sharing the same OSPF area 6 among multiple Backbone Routers. I'm trying to determine if I can evaluate the topology to ensure that each Backbone router has the exact same LSD...

Multiarea-OSPF.JPG
soumenG by Level 1
  • 60 Views
  • 2 replies
  • 0 Helpful votes

BGP between two remote FTD

I have two Firepowers in two remote offices and i have two ISPs in each office, i had configured vti ipsec vpn between two offices but they are working with static routes, can i configure dynamic routing protocols for failover vpn? I tried to configu...

ISE device admin Licnese

Hello I want to implement ISE in a network. Right now I want device administration TACACS to use, moreover; I want perpetual licenses.Do I need R-ISE-VMC-K9= License?Do I need a Device administration license (L-ISE-TACACS-ND=)?OR do I need both?I hav...

infome by Level 1
  • 155 Views
  • 8 replies
  • 0 Helpful votes

Issue with set ip default next-hop on n3k-c3064pq-10ge

Problem Description:I am encountering an issue with the "set ip default next-hop" command on my n3k-c3064pq-10ge device.Device Information:Model: n3k-c3064pq-10geSoftware:BIOS: version 5.0.0NXOS: version 9.3(13)Configuration Attempt:I am attempting t...

2swat by Level 1
  • 21 Views
  • 1 replies
  • 0 Helpful votes

Migrating ASA5510 to FRP1010e issue

Hi colleagues, I have the following issue, I'm migrating from cisco ASA5510 to FRP1010e managed via FDM. The configuration is simple and I moved it to the new device(FRP1010e). I have configured one interface for OUTSIDE with public address and VLAN ...

C9800 wlc Mgmtuser encrypt password

hi,the mgmtuser username password defined in my AP join policy show in clear text and cannot be encrypted.when i exe the command,mgmtuser username admin password 8 mypass123 secret 8 mysecret123always get error %password encryption failed: possible m...

Problems with DHCP Server

Hey, i am working on a project And I have problems with my DHCP server. I don't remember how it came about. Hence I am asking here. I don't understand why my laptops at the bottom are not getting ip? Anyone who can help me. Packet tracer + Network di...

TS40 by Level 1
  • 90 Views
  • 2 replies
  • 0 Helpful votes

FXO for overhead paging Webex-compatible device?

Hello -I'm trying to track down what might turn out to be a mythical solution, given my requirements, but I hope I'm wrong.Until recently, we ran overhead paging in our warehouse using our on-prem CM system via an FXO card installed in a 2911 voice g...

twedell by Level 1
  • 537 Views
  • 10 replies
  • 0 Helpful votes

Resolved! SLM248G latest firmware

Hi thereHas anybody by chance still the latest firmware for the small business switch SLM248G? Since it's EOS it's not anymore available in the official database...Thank you very much for checking.

br3schweiz by Level 1
  • 2468 Views
  • 10 replies
  • 0 Helpful votes

Message Filter

I am needing to make a filter that will modify the header. The rule should defer processing until the end of the message.Can anyone advise if this is possible?Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: