The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Does anyone have a Cisco 9800-L WLC Controller and successful installed a CA Signed Cert for Web Server? Not making the Certificate signing request, but actually already have the PEM and other files locally. Cisco TAC can't figure it out. The documen...
Hello I am working with a network that has currently 10 router nodes using IPSec tunneling to communicate and encrypt packets between the 10 router nodes over a wan. Using 140.0.0.0/30 (64 tunnels total) for IPSec Tunneling I have consumed almost all...
First I'll state i also have an open case with Vmware. I inherited a vPC pair that had a number of vPC set up, but the multiple links to the VxRail host nodes were trunk links. We lost the secondary so only the trunks to the primary vPC were up. A...
Hi All,Looking for snmp configuration for cisco N540x router.I got information in cisco docs.But configuration bit confuse.Can someone please send me actual command to configure snmp in cisco N540x routerThanks,Prashanth
My FTD (FDM) running code 7.2.5.1-29 is getting the following message on the Smart License section: CONNECTION ISSUEFailed To Connect With License Server Lost connection for 0 days (Next Sync on 28 Mar 2024 11:06 PM). Please check and make sure the m...
Hello all,I'm trying to make sure I understand the procedure for refreshing our current L2 APIC's with our new L4 APIC's.Currently our fabric is running 5.2(4) , and the new L4 APIC's require either 5.3 or 6.0.5 (which has just come out and is what w...
Hi! Can you help me with troubleshoot, I don't know where I am wrong?I don't see on BUH2, route from BUH1 (81.1.210.0/24).I attached config from BUH1, BUH02, ClinicaA01, ClinicaB02, P0.
I have no experience with this hardware and i can't get it to work. Booting an image lands me in rommon with the error message:Baseboard and rommon type mismatch. Rommon upgrade needed.%Software-forced reloadI switched over the MSFC4 to a RSP720-3C-1...
Hello,are there any best practices on the authentication timer settings?Is it common to let the settings for authentication timer reauthenticate and authentication timer restart on defaults?RegardsSebastian
I was just thinking about how in the early 2000's when I was just a wee little lad (like 18), I wonder a pallet full of Cisco AGS, MGS, IGS, and CGS routers for $1. It cost over $100 to ship it, but it was awesome. I tried using them to study, but ev...
Hello,I have a question about migrating a IPSec tunnel from between a Cisco C981F-k9 and a Cisco ASA firewall to a tunnel from the same Cisco C981F-k9 router to a Fortigate firewall. What is the 'best' way to migrate this tunnel?Currently I have conf...
I'm having a bit of a bother with my attempts to install and run Cisco Configuration Professional software. From the cisco support website, the install instructions indicate a link to download the software for CCP. -> http://www.cisco.com/en/US/doc...
Dears, i am not able to see all the acls with object groups on gui , however in cli i am able to see all acls applied. i have an issue with checking and modifying the acls on gui ( note that i upgraded the switch to the v17.9.4a ). Need assistance pl...
hi all,we have a topology without any redundant link. Every access switch is directly connected with the core switch, and it's a port-channel between access switch and the core. RSTP runs on switches by default, and we do not explicitly configure the...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: