The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
want to move the vpc heartbeat connection of a N9K pair from a L2 switch to a direct cable.To my understanding -as long as the peer link is up- a disruption of the heartbeat link should not affect any traffic to the connected hosts.Is this correct? O...
Talk to someone on Singapore 헔헶헿헹헶헻헲 smoothly, give their dedicated support line a ring at +[ퟭ-ퟴퟬퟰ-ퟴퟴퟲ-ퟬퟴퟴퟲ]. Take your time and listen carefully to the automated prompts, then share all the required information to help them solve your problem quickl...
Talk to someone on Singapore 헔헶헿헹헶헻헲 smoothly, give their dedicated support line a ring at +[ퟭ-ퟴퟬퟰ-ퟴퟴퟲ-ퟬퟴퟴퟲ]. Take your time and listen carefully to the automated prompts, then share all the required information to help them solve your problem quickl...
Is there a tool available to convert a Check Point Security Policy to a Cisco Access Control List?The process of doing this manually would be time consuming and could result in human error
Talk to someone on Singapore 헔헶헿헹헶헻헲 smoothly, give their dedicated support line a ring at +[ퟭ-ퟴퟬퟰ-ퟴퟴퟲ-ퟬퟴퟴퟲ]. Take your time and listen carefully to the automated prompts, then share all the required information to help them solve your problem quickl...
Hi Team,Our Router having many ikev2 proposal, as per TAC suggestion we need to combine in to single policy. Please let me know for this activity any down time needed ?
I have multiple AnyConnect connection profiles for various remote users that provide access to different internal networks. The authentication method needs to be certificate only, but there doesn't seem to be a way to prevent an issued certificate ho...
このセッションでは、Cisco Catalyst 9800 シリーズを活用し、無線 LAN アクセスポイントの消費電力を効率良く最適化する方法をご紹介します。デモを交えながら、時間帯に応じた電力制御の設定手順から、Cisco DNA Centerを用いた電力使用状況の分析と管理方法まで、実践的な操作を丁寧に解説します。
Hi Guys, i had this problem for 8 hours now and can't seem to get it cracked... after i input the command copy xmodem: flash:c2960-lanbasek9-mz.152-7.e9.binand using the SecureCRT going to Transfer > send xmodem I get this and after that nothing happ...
We're running into an issue where our agents on a third party contact centre system are experiencing 1 way audio on an intermittent basis roughly around the 15 minutes mark.This is a CUCM v10 solution, connected to said 3rd party contact centre solut...
Hi Experts,I am sitting with an unique issue where my Auto Attendant works perfectly from inside the office, however it is not reachable from external calls.Connection ISP > SIP > CUBE > SIP > CUCMWhat I am seeing is as soon as I direct the call to C...
HelloWe have a lot of clients getting the following error when contacting diffrent sites: ERR_SSL_PROTOCOL_ERROR, we have read that SonicWall and Palo Alto also have these problemes. Solution is to turn off "TLS 1.3 Hybridized Kyber Support" in chro...
I'm speaking of Essentials/Advantage/Premier. We use on-prem SSM.is there way to know how many licenses Cisco ISE gets from the binding to a virtual account on Cisco SSM?The only piece of information is the consumed ones, like knowing how many you ar...
Hai All can any one please give best practices for below deployment customer has Cisco ISE 3515 running on 2.7 which is EOL/EOS we Proposed new 3715 model. For configuration migration suggestions.