Cisco Community

OSPF Routing between Meraki and Nexus switches

We're having an issue with OSPF routing done on a Nexus9000 that we are not able to figure out. To explain the situation fully, I'm going to provide quite a bit of information, I apologize in advance. Our organization currently has several branches, ...

{{{1-888-829-1126}}} How to get a refund from 𝐄𝐱𝐩𝐞𝐝𝐢𝐚??? Call!!

Can I get a refund on 퐄퐱퐩퐞퐝퐢퐚?To initiate a refund request through 퐄퐱퐩퐞퐝퐢퐚, you should first review the refund policy associated with your booking in the "My Trips" section. If you require assistance or wish to request a refund, you can contact 퐄퐱퐩퐞퐝...

Media Converter suddenly stopped working

I have a TRIPP-LITE media converter Model: N785-H01-SFP that suddenly stopped working on my C9300-24S after I have updated from 17.6.5 to 17.9.4a. The steps I have taken to trouble shoot are as follow:- swapped the sfp on the switch and media convert...

Cisco SD-WAN: Application-Aware Routing - LAB

Configurando Application-Aware Routing A possibilidade de migração dos onerosos contratos de transporte MPLS para circuitos de internet se tornou, sem sombra de dúvidas, o principal fator responsável pelo crescente movimento das empresas na adoção da...

CCNA and then? CyberOps? CCNP?

Hello Cisco Community,I've been thinking about the next step in my IT career. I really enjoyed studying for the CCNA, and now? I was able to fill in the few remaining holes, but I'd like to go further.I have a preference in cyber security, however th...

How to enable R flag (R-bit) in ipv6?

Hi,how to manually enable the R flag (R-bit) in ipv6 config, let us say in a cisco csr1000v?I have this documentation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/command/ipv6-cr-book/ipv6-i3.html#wp1103499300but unfortunately I could only ...

Hi,I'm having trouble with this network topology of company expansion.

Anyone can help me with this network topology with company expansion network.

Issue forwarding calls CUCM > WEBEX > PSTN

Hi allwe have implemented some trunks from out CUCM to a CUBE then to webex.we can call the extension from the cucm on webex and it works fine.we translate the source of the call and prefix it with 8801, so webex sees the 8801 plus the extension as t...

Aironet 1830 series lost its IP address after power loss

Hello,We had a power loss on our site - equipped with 6 * Aironet 1830 Mobility express Series.The "master" Aironet lost power, so we had to reboot the whole 6 APs.The method is as follows :- first shut down the 5 "slave" APs- verify that the "master...

Cisco 9300 Downgrade Boot Loader from 17.9.2r to 17.3.2r

On a Cisco 9300 I need to Downgrade Boot Loader (ROMMON) from 17.9.2r to 17.3.2r. As a test I upgraded to IOS from 17.3.4 to 17.9.4a, as expected the Boot Loader upgraded as well with the IOS upgrade. When I upgraded the the IOS I did not initiate th...

#Copa How do I speak to someone at 𝗖𝗼𝗽𝗮 𝗔𝗶𝗿𝗹𝗶𝗻𝗲𝘀?

Directly At 헖헼헽헮 헔헶헿헹헶헻헲혀 phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is For USA +1-**(877)**-223-3819 // For UK +1-**(877)**-223-3819 Select your connection language upon call and choose the IVR option that best suits your query by...

False positive for Edge?

Hi. I wanted to toss this out there to see if anyone else encountered this in the last week or so.This morning, I opened up the console to 40% of my endpoints indicating a compromise. I opened one computer to start investigating. I found it to be a r...

Download Access points firmware

i need to download two ios autonomous software for access points Aironet 1600i and Aironet 1700i but Cisco requires partner login which I don't have can any one help with this request softwares are ap1g2-k9w7-tar.153-3.JF15.tarap3g2-k9w7-tar.153-3...

Reintegrating Replacement Switch into VPC Pair: Key Checks

"I'm seeking guidance on reintegrating a replacement switch into our production environment following a hardware failure. We utilize a VPC pair configuration, and one switch suffered complete hardware damage. We've obtained a replacement through the ...

Gathering the Data Usage per SSID on Catalyst 9800-40 WLC

Hello, I'm trying to gather the data usage per SSID on Cisco Catalyst 9800 Wireless controller. I can see nicely top 10 WLANs with the highest data usage on the dashboard, but I can't figure out how to gather this information from WLC. I'm trying t...

Congratulations to the Event Top Contributors Class of 2024!

April Community Updates

Introducing Our New Gamification Ranking Naming

Community Activity