The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Our MSP recommends the DNA Essentials license. I've recently taken over and it's been renewed a few times. I see this is for Catalyst Center? I'm looking into how I can use Catalyst Center to see if it's worth it, (we're a small shop with 6 stack and...
Hi, I am new to Software-Defined Network. Currently upgraded a building of old switches into Catalyst 9K series with still a traditional networking. If implementing SD Access into the traditional networking by using DNA Center, do I have to manually...
During the FTD HA upgrade from FMC, if first standby is failed /corrupted during the upgrade ,will FMC will try to upgrade other devices in the failover pair or will abort the upgrade?.
I have a new isp on a 2nd outside interface. I would like to send all traffic from one ip range and only that range out over the new ISP.Currently Here is what I haveinterface GigabitEthernet1/1nameif Outsidesecurity-level 0ip address a.a.a.a 255.255...
we want to upgrade ucs to new version 4.x.x Does I need upgrade windows server driver ,I found Cisco provide iso driver according to new Ucs version. we have windows server 2012 But I search Cisco ucs compatible matrix web site I found according to ...
So normally a standard interface has an MTU of 1500.When creating a sub-interface on a router (or using an SVI on switch), should the MTU be manually lowered to 1496 to account for the extra 4 bytes?Everything just seems to work without this, so I am...
So basically I have this problem I have setted policies for Dot1x and MAB on both Cisco IOL L3 (version 15) and Cisco ISE (RADIUS Server) but client do authentificate only with the default method which is MAB (I did set an order for methods on Switch...
hi Cisco,I am using below topology in my lab where ASA in multiple context - C1 and C2 sharing the same physical interface, in different VLANs (sub interface) is not able to establish EIGRP neighborship with 2 cisco routers (point to point). Although...
Hi, My Cisco RV260 router stopped booting from the bouth internal image files. I would like to create a USB boot drive with the original firmware (RV16X_26X-v1.0.01.10-2022-09-12-06-56-24-AM.img) , but I have no idea how to name the img file for USB ...
Hi AllI've inherited a newtwork that includes the C3850 and we've installed the C2960X. These are hooked up via copper ethernet and have a very simple configurationC3850 interface GigabitEthernet2/0/2 description Uplink to C2960X switchport mode tr...
Hello Folks, I have a pair of ASA5516 with HA mode, ISP provides a high-speed WAN 500Mbps up/download, while doing some speed tests recently we noticed that all our tests from the inside network are not bypassing 100mbps, I checked all inside/outside...
hi all,Thanks for your reply!physical topology is very simple: core switch stack (2x WS-C6506-E) connects to access switch via port-channel, no more redundant link. I see lots of topology change logged from core switch, for example:Number of topology...