Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919061members
1223051discussions

Community Activity

Poor 5Ghz throughput - 9800 / 17.9.4a / 1800-series APs

Hi,Per the title, I've got an issue with 5Ghz clients that have good signal strength because they are sat almost underneath the AP (1832 APs) yet but struggling to get more than 1Mbps throughput.  I can see the channel utilisation is over 50% but zer...

Tacacs server configuration problem

Greeting everyone! There is a little problem with configuring tacacs server on ws-2950-24 model switch. The rest switches we have are 2960 series, also 3xxx series and others, more modern versions. We always configured tacacs server this way:tacacs-s...

Resolved! Access Point

Hi all, can the cisco catalyst AP model 9136I, act as Autonomous.

CISCO C1111-4P software upgrade path

I have a C1111-4P router with c1100-universalk9.17.06.01a.SPA.bin image loaded, I want to update to c1100 universalk9.17.13.01a.SPA.So can I update directly to a new image or need to update any intermediate?

fti-it by Level 1
  • 88 Views
  • 2 replies
  • 0 Helpful votes

Ruckus 7150 to Cisco 3750 trunk port not working

I am trying to configure a trunk port on a Cisco 3750 that has fiber running to a ruckus 7150 switch.My current config connects the switches but it is only passing vlan1 traffic and I want multiple vlans. Therefore, I configured the port as a trunk o...

oowJ by Level 1
  • 97 Views
  • 2 replies
  • 0 Helpful votes

Upgrade from SNS-3595-K9 to SNS-3795-K9

Hello, I have two ISE 3595 (3.2 Patch 3) physical appliances, one in each Data Centre. They will be end-of-life in a few months. They are currently used for Wired NAC with Posturing, Wireless NAC (corporate, BYOD and Guest and Hotspot). It is also us...

SDWAN 20.10 - DevNet Sandbox

Hello community!This is my first time typing here so I am hoping I do not mess this up, lol! I am testing some automation code to upgrade SDWAN controllers from code 20.10.1 to 20.12.2 on Sandbox, and the code works to stage the image and then activa...

fiber port not coming UP

we have CBS350-24P-4G fiber port not coming upNAME: "GigabitEthernet25" DESCR: "SFP-100Base-LX"PID: SFP-100-LX VID: Information Unavailable SN: 9802222809DataSwitch1F#sh fiber-ports optical-transceiver interface gi25Port Temp Voltage Current Output I...

Resolved! Catalyst 3580 to 9300 Migration

Hi All , I am in the testing phase of migrating to a 9300. So far I have done the below.3850 running 16.3.6   and 9300 updated 17.09.04aI have copied the start-up config to the 9300 - all looks ok apart from the usual ip routes , some interfaces not ...

machine23 by Level 1
  • 93 Views
  • 2 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: