Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919579members
1224080discussions

Community Activity

How To Change📞*+𝟭 (𝟴𝟰𝟰) 𝟱𝟯𝟭–𝟭𝟬𝟵𝟵 𝐅light On 𝐅rontier Air

 You can change your fligh퓣 on 퐅퐫퐨퐧퐭퐢퐞퐫 퐀퐢퐫퐥퐢퐧퐞퐬.com or the 퐅퐫퐨퐧퐭퐢퐞퐫 퐀퐢퐫퐥퐢퐧퐞퐬 app in four steps: Go to My Trips. Select “Change fligh퓣” Select “Edit” to update your fligh퓣. Or call 퐅퐫퐨퐧퐭퐢퐞퐫 퐀퐢퐫퐥퐢퐧퐞퐬 change fligh퓣 officials at +ퟭ (ퟴퟰퟰ) ퟱퟯퟭ–ퟭퟬퟵퟵ (OTA)....

How To Change📞*+𝟭 (𝟴𝟰𝟰) 𝟱𝟯𝟭–𝟭𝟬𝟵𝟵 𝐅light On 𝐒wiss Air

You can change your fligh퓣 on 퐒퐰퐢퐬퐬 퐀퐢퐫퐥퐢퐧퐞퐬.com or the 퐒퐰퐢퐬퐬 퐀퐢퐫퐥퐢퐧퐞퐬 app in four steps: Go to My Trips. Select “Change fligh퓣” Select “Edit” to update your fligh퓣. Or call 퐒퐰퐢퐬퐬 퐀퐢퐫퐥퐢퐧퐞퐬 change fligh퓣 officials at +ퟭ (ퟴퟰퟰ) ퟱퟯퟭ–ퟭퟬퟵퟵ (OTA). You can r...

How To Change📞+𝟭 (𝟴𝟰𝟰) 𝟱𝟯𝟭–𝟭𝟬𝟵𝟵 𝐅light On 𝐄thiopian 𝐀ir

You can change your fligh퓣 on 퐄퐭퐡퐢퐨퐩퐢퐚퐧 퐀퐢퐫퐥퐢퐧퐞퐬.com or the 퐄퐭퐡퐢퐨퐩퐢퐚퐧 퐀퐢퐫퐥퐢퐧퐞퐬 app in four steps: Go to My Trips. Select “Change fligh퓣” Select “Edit” to update your fligh퓣. Or call 퐄퐭퐡퐢퐨퐩퐢퐚퐧 퐀퐢퐫퐥퐢퐧퐞퐬 change fligh퓣 officials at +ퟭ (ퟴퟰퟰ) ퟱퟯퟭ–ퟭퟬퟵퟵ (OTA...

How To Change📞*+𝟭 (𝟴𝟰𝟰) 𝟱𝟯𝟭–𝟭𝟬𝟵𝟵 𝐅light On 𝐀llegiant Air

 You can change your fligh퓣 on 퐀퐥퐥퐞퐠퐢퐚퐧퐭 퐀퐢퐫퐥퐢퐧퐞퐬.com or the 퐀퐥퐥퐞퐠퐢퐚퐧퐭 퐀퐢퐫퐥퐢퐧퐞퐬 app in four steps: Go to My Trips. Select “Change fligh퓣” Select “Edit” to update your fligh퓣. Or call 퐀퐥퐥퐞퐠퐢퐚퐧퐭 퐀퐢퐫퐥퐢퐧퐞퐬 change fligh퓣 officials at +ퟭ (ퟴퟰퟰ) ퟱퟯퟭ–ퟭퟬퟵퟵ (OT...

Is there any way design ASR+OTV Redundancy active/standby

Hi  Is there any way design ASR + OTV Redundancy  by routing  instead EMM and bfd script ?We have two router ASR and 2 ISP Link to redundancy.So we now using EMM + bfd for control failover OTV link (active/standby) When Link ISP A down EMM action shu...

TimeOut_0-1711773792178.png
TimeOut by Level 1
  • 27 Views
  • 0 replies
  • 0 Helpful votes

Controller Moving

Hi I have a 11 APs that are connected to controller 5508. Unfortunately the controller is not turning on. At the moment my system is down and I need to move the APs to the new controller. I already have installed Cisco 9800 WLC Virtual. But the issue...

Acl-copp-management

Hi,can someone please advise why I need line 4 of below Acl? I understand we use established when we want to allow the response to the connection initiated from the internal network but on line 3 we allow ssh from any source to any destination alread...

D@1984 by Level 1
  • 100 Views
  • 2 replies
  • 0 Helpful votes

Cisco + Splunk: It's a new day for your data.

We’re excited to share that Splunk is now part of Cisco, enabling our customers to use their data in more powerful ways. Cisco + Splunk: Learn more. Just added: Executive Roundtable on the Future of Cisco and Splunk webinar on April 4th, 2024 | 10 AM...

US-ENG_IA-12_0_1200x628_BAN-S_JPEG_TOFU-no-B2P-SplunkWebinar-All_0_VISIT_6.JPEG.jpg CiscoSplunk-Community-600x300.jpg
Sabah Kadir by Community Manager
  • 2403 Views
  • 67 replies
  • 20 Helpful votes

Ip Directed broadcast and ip helper

Hi All,What would happen if you configure an SVI eg VLAN 10 with an ip helper and then configure a VLAN 11 without ip helper, but with a physical dhcp server attached in that vlan. You then configure ip directed broadcast on both SVI's.interface Vlan...

TAHUSD-SLOT1-4-BUFFER_THRESHOLD_EXCEEDED (Nexus9000)

Hello everyone!I'm not a network engineer but as a subsystem (kernel + filesystem) engineer I know the network concept.Few months ago, I designed a DMZ and configured my 2 node VPC with 6 rack switch.Everything was smoothly working but I started to s...

Ozy by Level 1
  • 167 Views
  • 3 replies
  • 0 Helpful votes

C9800 wlc Mgmtuser encrypt password

hi,the mgmtuser username password defined in my AP join policy show in clear text and cannot be encrypted.when i exe the command,mgmtuser username admin password 8 mypass123 secret 8 mysecret123always get error %password encryption failed: possible m...

EAP Methods Summary

Sometimes we are just asked for assistance to configure a secure WLAN doing authentication against a “server” (most of the time trying to simulate what they already have on wired, normally for authentication of the domain users), but having no idea t...

Jeal Jimenez by Cisco Employee
  • 15005 Views
  • 5 replies
  • 41 Helpful votes

Using EAP-PEAP for wired

We have devices that only support EAP-PEAP and I want to use an AD username to auth the device so it can connect to the WIRED network. My question is if the password for the AD user change will that kick all the devices of the network that were added...

Community string in SNMPv3

Hi, I am trying to configure SNMPv3 on ios-xr 7.9.21, and I am a bit confused about the role of the community string in SNMPv3, I thought that v3 had an user based model and that community_strings were a SNMP v1/2 concept but when I try to enter the ...

ThomasD86 by Level 1
  • 241 Views
  • 2 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: