The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
I need to know if the rule I configured and validated is a good configuration practice in a production environment, can you check and help me feel more at ease?I set up a laboratory to connect via PEAP EAP-TLS, it worked in the lab, but I would like ...
Rebooted CMX a week back, but CMX is still showing low count on active APs, is this a known bug? Placed AP Missing AP Active AP Inactive AP3224 2913 24 3200
Hi. I recently attempted to update 2x C9500 in SVL via DNAC from 17.6.4 to 17.9.4. It initally looked to be progressing all ok with being distributed then activated on each unit. DNAC then stated process had failed. I manually checked switches via CL...
hi,is it possible to configure two vpc peer-link (port-channel trunk) between two N9K?i.e. port-channel 1 would be a temporary trunk and uses MM fiber cable and port-channel 2 would be the 40GBASE-CR4 pre-fab direct cable.the 40GBASE-CR4 would arrive...
howdy, installing denali 16.2.1 on a 3850 stack, all similar switches. i keep getting this error when i attempt to install the package FAILED: Switch switch 4 boot path does not match with the active please advise.
Hi Everyone. what would be a great dial plan for a cisco 8861 3pcc with a 5 digit extension. I recently changed the exts from 4 digit to 5 digit. The dial plan that they currently have is (<*97:vmm> | [1-7]xxx | 9,[1-9]xxxxxxx | 9,04xxxxxxxxxxx | 9,0...
Greetings, We had deployed mobility express for wireless complrising of 2800 1800, 1542 6300. But now we have to replace one faulty 1542 and as this is end of sale - catalyst 1542 is the optio Can 9124ax join existing mobility express or shou...
I got my CCNA years ago and have been a Cisco user not only professionally but in my home. It is always good to go with what you know especially in your home. I a not sure how long ago it happened but now I can no longer upgrade my equipment or any "...
I have five C9300-48P switches connected in stack and in service.I want to upgrade the IOS from version 16.6.5 to the recommended version, which is 17.9.5I have always done it with "offline" switches, but never with switches in service.Can I upgrade ...
Hi I have a problem and I am finding it really hard to get thee right answer from documentations: The customer has 100Mb link and below are the bandwidth allocation to different classes: 100m port = EF = 17.5m / AF1 = 5.5m / AF2 = 16.5m / AF3 = 22m ...
Hello,I work for a company where i need to stage 9120 access points and provision them manually with a AP Name and Primary controller before i ship them out. After issuing the commands it seems the AP just ignores them and doesn't update the AP name ...
We are planning to test the failover of sip trunk by shutting down the primary interface to check if the calls are routing through the secondary sip trunk. I hope there is a configuration in cucm where we can choose the primary and secondary sip trun...