Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919432members
1223744discussions

Community Activity

FXO for overhead paging Webex-compatible device?

Hello -I'm trying to track down what might turn out to be a mythical solution, given my requirements, but I hope I'm wrong.Until recently, we ran overhead paging in our warehouse using our on-prem CM system via an FXO card installed in a 2911 voice g...

twedell by Level 1
  • 536 Views
  • 10 replies
  • 0 Helpful votes

Issue with set ip default next-hop on n3k-c3064pq-10ge

Problem Description:I am encountering an issue with the "set ip default next-hop" command on my n3k-c3064pq-10ge device.Device Information:Model: n3k-c3064pq-10geSoftware:BIOS: version 5.0.0NXOS: version 9.3(13)Configuration Attempt:I am attempting t...

2swat by Level 1
  • 3 Views
  • 0 replies
  • 0 Helpful votes

Same OSPF area with multiple ABR

HiCould someone verify if the topology (attached) is feasible? It involves sharing the same OSPF area 6 among multiple Backbone Routers. I'm trying to determine if I can evaluate the topology to ensure that each Backbone router has the exact same LSD...

Multiarea-OSPF.JPG
soumenG by Level 1
  • 26 Views
  • 1 replies
  • 0 Helpful votes

Resolved! SLM248G latest firmware

Hi thereHas anybody by chance still the latest firmware for the small business switch SLM248G? Since it's EOS it's not anymore available in the official database...Thank you very much for checking.

br3schweiz by Level 1
  • 2454 Views
  • 10 replies
  • 0 Helpful votes

Migrating ASA5510 to FRP1010e issue

Hi colleagues, I have the following issue, I'm migrating from cisco ASA5510 to FRP1010e managed via FDM. The configuration is simple and I moved it to the new device(FRP1010e). I have configured one interface for OUTSIDE with public address and VLAN ...

C9800 wlc Mgmtuser encrypt password

hi,the mgmtuser username password defined in my AP join policy show in clear text and cannot be encrypted.when i exe the command,mgmtuser username admin password 8 mypass123 secret 8 mysecret123always get error %password encryption failed: possible m...

Message Filter

I am needing to make a filter that will modify the header. The rule should defer processing until the end of the message.Can anyone advise if this is possible?Thanks!

Resolved! Core to access switch ping working and access to core is not pinging

Hi,we are facinf and issue with ping from access to corecore management vlan 98 192.168.98.1 255.255.255.0vlan 103 192.168.103.1 255.255.255.0trunk port enabled for vlan 103able to ping access switchAccess switch management vlan 192.168.103.137 255.2...

ziyadps by Level 1
  • 195 Views
  • 8 replies
  • 0 Helpful votes

Replacing Juniper GWs with Cisco

Hello Everyone. I am working on replacing juniper GW(production)switches with C9500’s. Those junipers are in active standby.My approach is pre-stage cisco switches copy configs from juniper to cisco. Here one question is juniper GWs are using vrrp fo...

clearance required for 9200CX

Hello Bro,I am looking at the rack mount information about 9200CX, but could not find the clearance it may require to dissipate the heat from the switch. Does anybody share if the switches can be stacked tightly one on top of the other?Much appreciat...

mcmib by Level 1
  • 182 Views
  • 4 replies
  • 0 Helpful votes

OID to check for active multicast groups?

As the title says, I'm trying to figure out if there is an OID/MIB I can poll that will return active multicast groups. It was presented to me that a team deploys media encoders that initiate the group and it would be quicker for the team to troubles...

KGrev by Level 4
  • 36 Views
  • 0 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: