Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1920275members
1225237discussions

Community Activity

Cisco Firepower Base Licenses Issue

I am using Cisco Firepower 1120 in High Availability without FMC. Customer did not purchased additional license license like URL, VPN etc etc. So I think base license covers basic functionality like inferface configuration, NAT etc etc. Customer does...

Please help with this Topology Configuration

Configure Open Shortest Path First(OSPF) Update should be advertised only out of the interfaces that are indicated in the IGP topology diagram OSPF process ID is 47 Configure OSPF router ID with interface loopback 0 on respective router.What is the r...

Site 1-ospf connectivity.png

801.1x Method Status List Empty

We're seeing an issue on our 9200 series switches where we get the message "Method Status List Empty" when trying to authenticate devices either for the first time, or when a switch is restarted. To resolve, "clear authentication sessions" is require...

DM812 by Level 1
  • 0 Views
  • 0 replies
  • 0 Helpful votes

TLOC Preference in Template vs Central Policy

Hello experts, I have a question in SD-WAN about what happens if you define an interface template with TLOC preference in this way:encapsulation ipsec preference 200 weight 1And parelly you also define a Central Policy with a TLOC statement where you...

SD-Human by Level 1
  • 117 Views
  • 3 replies
  • 1 Helpful votes

Cisco AP stby 9115

I would like to operate 2 products of cisco ap 9115. You set the virtual controller IP for the two APs to XXX.XXX.XXX.232. IP was set to 233 and 234 respectively as an Access Point. If you boot after setting it up like this, one AP will ...

heyjunsun by Level 1
  • 75 Views
  • 3 replies
  • 0 Helpful votes

RIP not working

Hi guys, I wanted to learn about RIP, but somehow it's not working.Can someone explain me why in the RIP table of the main router, it's displayed a network 10.0.0.0, when I insert 2 networks: 10.10.1.0 and 10.10.2.0. I am using RIP version 2, doesn't...

Welcoming Duo Security to Cisco Community

I’m happy to announce that the Duo Community migration is complete! All community.duo.com links now redirect to the new Duo Security area of Cisco Community. Thousands of pieces of content have been migrated over the weekend, and I thank you for your...

Duo Announcement.png
dbrittin by Community Manager
  • 30648 Views
  • 6 replies
  • 14 Helpful votes

Referred-by vs Diversion header

Hello, We are configuring MS Teams calling with Direct Routing. We see that transfers to PSTN are not working.  In the INVITE message going to PSTN, we see a Referred-By header, but our provider says that they need a Diversion header to make the tran...

Djeten by Level 1
  • 50 Views
  • 2 replies
  • 0 Helpful votes

SIP outbound call Disconnect Cause=47

Hello all, We started having issues with outbound calls with a SIP provider. This below is the call flow: CUCM -> SIP Trunk -> Voice gateway -> SIP Trunk -> Provider On the voice gateway, I'm getting a disconnect cause=47. Viewing the logs, it seems ...

SIP outbound call Disconnect Cause=47

Hello all. We started having issues with outbound calls with a SIP provider. This below is the call flow: CUCM -> SIP Trunk -> Voice gateway -> SIP Trunk -> Provider On the voice gateway, I'm getting a disconnect cause=47. Viewing the logs, it see...

Translator by Community Manager
  • 103 Views
  • 2 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: