The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi Team,I've followed this guide :https://developer.cisco.com/learning/modules/webex-messaging-bots/webex-messaging-adaptive-cards/designing-the-adaptive-card/All worked for me, until this step : This is my index.js file looks like after this step:An...
What is the max client count that is recommended for cisco 9120 and 9130 AP operating on wifi 6 with which I can except a decent performance.Could someone please help me with this query?
Afternoon All,I am currently working on a Site-2-Site VPN at home I have connected a cable between both Outside Interfaces. It's been a while since I have done this on an ASA5505. I have this little voice telling me there is an issue with the differe...
Hello all,Maybe this question was published before but i was unable to find an answer that solvedy issue.I acquired an UCS C240 M4 recently with firmware version 2.0.I upgraded to version 4.2 without problem.Since I had no access to the CIMP web int...
If I have Site A and Site B:Site A has Border switch that sending prefixes over eBGP peering and multiple eBGP peerings for separate VRFs to the Cisco Routers and that Cisco Router connected via dark fiber with Site B FW (lets say palo alto)What will...
Hi,how to manually enable the R flag (R-bit) in ipv6 config, let us say in a cisco csr1000v?I have this documentation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/command/ipv6-cr-book/ipv6-i3.html#wp1103499300but unfortunately I could only ...
I have Cisco 9200 switch with public IP and NAT empowered successfully giving Internet admittance to clients behind it. The most effective method to distribute Exchange worker behind the switch utilizing previously mentioned Public IP so clients can ...
Grabación del webinar Community Live Integración de ACI con entorno VMware Video con nuestros expertos Armando Varret y Pablo Juárez. Esta presentación además de TAC Tips, incluye mejores prácticas y recomendaciones. Recuerde que puede enviarnos preg...
Access VLANs and Internet through multiple wireless SSIDs, using Autonomous AP AIR-CAP3702Challenge: Access internet through autonomous Access Point (Air-Cap3702i-e-k9) which populated multiple SSIDs that connected to the VLANs at Remote Office. Diag...
Hello, i still asking about how the network send the data to internet looks like. Can anyone help to explain.Every data we send to the internet will always pass through the ISP, which means the ISP can know the destination (and perhaps the contents o...
Every time I press the pound key then any number after it the phone says invalid number without me putting in the full ext. #968 is my page code. / Overhead paging code. Is it the dial plan?
Hi,I have a problem with this configuration as of certain FW. I know version 3.1.0.17 was OK and current one 3.4.0.17 is not and unfortunately it is not possible to downgrade to confirm the issue. I am running DANTE alongside WYrestorm Network HD vid...
So this is a topic that's been mentioned time and time again I'm sure but i wanted to get a bit more specific to my situation. We're replacing our core switch with a C9300 (we currently have a 3750). We have a pretty simple network. Any desk with a c...
we have a cisco ASR 903, IOS is asr903rsp1-universalk9_npe.V155_1_S2_SR635680903.bin after performing ISSU the card is stuck in init, standby for a long time.
Hi,I found information about the latest device drivers:ASA 5505 - 9.2(4)33ASA 5510 and ASA 5520 - 9.1(7)32Why can I only download version 9.0.4 Interim on the cisco website?https://software.cisco.com/download/home/280582808/type/280775065/release/9.0...