Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919391members
1223669discussions

Community Activity

BGP between two remote FTD

I have two Firepowers in two remote offices and i have two ISPs in each office, i had configured vti ipsec vpn between two offices but they are working with static routes, can i configure dynamic routing protocols for failover vpn? I tried to configu...

Anyone help me with this topology

1. Make end to end connectivity first. 2. Block the network for these site   1)Make sure that Site 4 will not advirtise any network to Site 5 which it receiving from Site3 routers.  2) On site 5 , when we check routing table of R2 router,  it dont ha...

1111111111111111111111.png

PPPOE configuration on asr9k

Team,,We need to do below similar configuration of ASR1002 in our new ASR9001 please supportip dhcp pool PDY-3network 30.23.0.0 255.255.0.0default-router 30.23.2.1dns-server 8.8.8.8 4.2.2.2bba-group pppoe PDY-3virtual-template 3sessions per-mac limit...

Is this NAT configuration avaiable in ASR 9001

We have ASK 9001 Is this NAT configuration available if not what is the alternate configuration? we are trying to setup a PPPOE configuration in ASR9001 and configured DHCP pool, BBA . how to add nat inside and outside configuration for the authentic...

aci_rest ansible and token APIC-cookie

 Is it possible using the ansible aci modules to login once and get the token and pass the cookie on subsequent aci_rest tasks? The goal is to avoid having to login and logoff with userid/password on aci_rest calls that have loops.  Is this possible?

cyberpea by Level 1
  • 10 Views
  • 0 replies
  • 0 Helpful votes

ESA file analysis (AMP) lost emails

Hello community,  we have HW cisco with HW Threat grid integration. The problem that we have is when the file is send for analysis the message is quarantined in File quarantine. I checked that the Threat grid needs 5-10 min to finish the analysis, af...

Is ACI to replace this design?

Assume I have to routing among different block of campus network with a square cross connected with OSPF peer to peer type,what is the disadvantage of this square cross design?Is ACI fabric used to replace this square cross design? or replace campus ...

Maivakov by Level 1
  • 104 Views
  • 2 replies
  • 0 Helpful votes

Problems with DHCP Server

Hey, i am working on a project And I have problems with my DHCP server. I don't remember how it came about. Hence I am asking here. I don't understand why my laptops at the bottom are not getting ip? Anyone who can help me. Packet tracer + Network di...

TS40 by Level 1
  • 58 Views
  • 1 replies
  • 0 Helpful votes

ISE device admin Licnese

Hello I want to implement ISE in a network. Right now I want device administration TACACS to use, moreover; I want perpetual licenses.Do I need R-ISE-VMC-K9= License?Do I need a Device administration license (L-ISE-TACACS-ND=)?OR do I need both?I hav...

infome by Level 1
  • 115 Views
  • 5 replies
  • 0 Helpful votes

how to modify TTL to less values at routers?

Assume that there are three router type devices outside firewall, and one core switch router behind one layer firewalland I would like to hide the router hop of core switch router from traceroute how to modify TTL to less values at router at the most...

Maivakov by Level 1
  • 144 Views
  • 5 replies
  • 0 Helpful votes

Reports and Exports for FMC/FTD

Is it possible for the FMC to run a report to indicate what rules are inactive/disabled? What about reporting what objects are not being used?I know beside various items there is a "report" icon, or "export to csv" but this isn't giving me the info I...

VPN credentials not received after sanbox reservation

Hi there,I tried to reserve 3 times "Open NX-OS Programmability AlwaysOn" Sandbox. However, I do not receive any VPN Credentials to connect to it. The first email I receive mentions that I will receive a second email with your lab’s access credential...

Replacing Juniper GWs with Cisco

Hello Everyone. I am working on replacing juniper GW(production)switches with C9500’s. Those junipers are in active standby. My approach is pre-stage cisco switches copy configs from juniper to cisco. Here one question is juniper GWs are using vrrp f...

thiago34 by Level 1
  • 50 Views
  • 1 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: