The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Já cursei o Conceitos Básicos de Redes e/ou CCNA1 e/ou CCNA2 em outra academia, posso participar do WRIT 2024 nas etapas seguintes? Sim. Pedimos anexar neste tópico o arquivo PDF, com o certificado do Skills for All ou Networking Academy do curso já ...
Talk to someone on Allegiant 퓐퓲퓻 smoothly, give their dedicated support line a ring at ️+ퟭ(ퟱퟳퟯ) ퟲퟬퟲ ퟰퟱퟮퟬ. Take your time and listen carefully to the automated prompts, then share all the required information to help them solve your problem quickly....
We have FMC and FTD , In FMC we configured Blocked traffic ACCESS POLICY , but while checking in FTD(CLI) one more ACL( Ifc Outside any any allow) showing with same rule-id 26844160. any ideas how to find this ACL in FMCACL in FTD ========access-li...
Talk to someone on Singapore 헔헶헿헹헶헻헲 smoothly, give their dedicated support line a ring at +(((ퟭ-ퟴퟬퟰ-ퟴퟴퟲ-ퟬퟴퟴퟲ))). Take your time and listen carefully to the automated prompts, then share all the required information to help them solve your problem qu...
What is the MTBF for 1000BASE-SX SFP adapters? I have looked through the product documentation/specifications here with no success (the product documentation is pretty weak): https://www.cisco.com/c/en/us/support/interfaces-modules/1000base-sx-sfp/mo...
Hi,FTD was added and to FMC and while configuring HA in FMC, deleted FTD from FMC.While trying to add again to same FMC, both primary and secondary FTD not getting registered in FMC.Could you please help on getting the FTD registered with FMC.
When a client connect to the HQ via AnyConnect vpn, they can access the HQ local subnet, but can´t access the subnet at the remote office, that has an site-to-site connection to the HQ.Can this be configuret via the Cisco Firepower gui?Cisco Firepowe...
Hello,When configuring SSL VPN, the default encryption type is "ssl server-version tlsv1.2 dtlsv1.2", which only shows up with a "show run all". In that output, I can also see that "ssl cipher tlsv1.2 medium" and "ssl cipher dtlsv1.2 medium" are disp...
Hello,we are stilll using a isr2900 router as a SBC.Currently it uses the securityk9 license and a uck9-cme-srst-cube license as smart licensing.The logging output tells me that the evalution period already expired.I know the product is EOL/EOS but s...
Hi all I'm setting up a CISCO LAB to keep me busy in my retirement. My Current network consists of a TP-Link Deco mesh network which works well for my IOT, PCs and internet access. I just got hold of a Cisco 1941 router with a EHWIC D8SGP module. ...
ive just implemented cisco duo for anyconnect on my asa. some users are experiencing getting multiple 2FA requests on their phones back to back instantly sometimes 3 request, my timeout is 60 secs set on the ASA and my max failed attempts is 3. is th...
We currently have two 9800 WLCs serving our schools. Their configs are virtually identical. When clients connect to one specific SSID on 9800 A, they'll connect at expected speeds using 11ac or 11n protocols. However, when clients connect to the same...
When i discover a new switch with LAN-automation other switches, which are not directly connected to the specified interface are going into a queued status. Which means:Queued: The device is queued for later processing because it isn’t directly conne...
The Cisco Document Team has posted an article. This document describes how to reformat the entire system, erase the images, and return it to its factory default settings. Know of something that needs documenting? Share a new do...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: