The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Introduction:This document describes details on how NAT-T works. Background: ESP encrypts all critical information, encapsulating the entire inner TCP/UDP datagram within an ESP header. ESP is an IP protocol in the same sense that TCP and UDP are...
Hi, I am trying to find an API that will show me which policy (access/vpc etc.) a physical port is tied to. This is so easy to see on GUI as it appears on the "operational" tab of a physical port, however I haven't been able to locate a direct API. I...
Trying to run the following queries to pull data for API data on vManage 20.6.5: /dataservice/statistics/dpi/device/applications/dataservice/statistics/dpi/device/details/applications However, query returns back with the following error: {"error":{"t...
Amigos de la comunidad les comparto el siguiente video acerca de mi primer acercamiento con un equipo WLC 9800, espero pueda orientar a algunos que recién comienzan.
Good afternoon We have a problem after an unexpected hardware shutdown, now when logging into CUCM an error appears " WARNING: Ungraceful shutdown detected - A rebuild or upgrade of this node may be required to ensure no negative impact (such as con...
I have created a tunnel-te from xrv16 to csr3, the tunnel is up and getting Pop label to csr3 that's ok.From xrv16 I have learned the route to xrv17 over the tunnel, but checking the Label it's unlabbled as well.I believe the route from xrv16 to xrv1...
Hello,We have upgraded all from 12.5 to 15 and Jabber fails (login) from outside. From inside all is fine. What would be a workaround to fix it.I assume its not a bug but just things are a bit different in 15. I also tried xConfiguration EdgeConfigSe...
Hi, I'm configuring the SD-WAN Control Components 20.14 for a lab. I successfully created and attached a device templates with feature templates for the manager and the controller. I created a vEdge Cloud template for the Validator (vBond). But when ...
Good morning, I currently have a Cisco C8200-1N-4T router.The provider gives me 3 SIP frames The router has 4 WAN interfaces, Having said that, I ask you these questions: Can one of those WAN interfaces be used for my LAN? Can those interfaces be use...
We recently moved to a SIP trunk and inbound/outbound calls worked just fine, but DTMF is not functioning for SCCP phones. When a call is made and we get an auto-attendant (using a SCCP phone), when selecting an option, the selected option is not reg...
we have a cisco ISE 3595 and I rebooted it by typing reload in the cli. I finally hooked up a vga connection to a monitor and its just stuck on "configuration memory testing memory", keyboard seems unresponsive. I tried connecting from the I/O in the...
At one of my customers, I am implementing CER for emergency dialing (obviously). I have configured and tested 911 call routing. All call routing for emergency services stays on sight (calls go to the on site security desk) and right now 911 is the ...
i have a ucs c220 working properly, but would like to access in cimc interface and i don't have the correct user and password. what is the best way to reset that?
Encoder has just one interface too generate Multicast and Unicast video streamsIf all ports of switch are in same VLAN and SSM is not enabled, Client1 is able to play unicast and Client 2 is able to play multicast but when number of streams increase ...