Does any current switch hardware support IPX routing?

We are replacing old Catalyst 6500 switches in one of our business units. The 6ks supported legacy IPX routing for data recovery operations, which is required in some cases for their work. I have been searching for any current info regarding this fea...

I want to create a pop-up notification if computer gets isolated

Our organization would like to create a pop-up notification on an end user's device that informs them that their computer has been isolated and they need to contact IT services.My question, is there a specific registry key or a file that gets created...

Meeting join option settings defaulting to Cisco Phone

I am currently on version 44.4.0.29432 and configured my Webex app Meeting Join Options to use my computer for audio as the default join options as seen in the screenshot below. But if I am connected to my desk phone (8875), using the connect to a de...

How to determine API load on an APIC

I have a controller which is very slow to respond via web GUI and I suspect that maybe one or more devops or ops teams is hammering it with API calls.  Is there a way to quickly determine how much of the system resources are getting consumed by API c...

ESA Cluster query

Hi All, Need to configure an Cluster between Hardware device and Virtual appliance and later will remove the Hardware appliance. Before jumping into configuration i have a some query. 1. Is it sma required after forming an cluster to manage the devic...

Configure password policy and secret type 9

we configure a password policy, but we can't link it to the local user with a secret, if we need to link it with a local user, we should use password instead of a secret, any help hereThanks

IKEv2 Issue, can\t bring tunnel between Cisco Router and Palo Alto

Hi, I'm getting strange issues when I cannot bring up the tunnel between Cisco Router and Palo Alto FW,On Cisco router side I'm getting this on debug IKEv2:==================================================================*May 10 06:34:55.253: IPSEC:...

Reverting EMERITUS CCIE to Active CCIE

Hello Community:I have a question about certification.It happens that my CCIE certification expired last month and I need to revert it back to "ACTIVE CCIE" in order to be used in Channel Partner ISSUES.  Please, does anybody know exactly what I shou...

VTP and HSRP config on two core switches

hello Experts,Please help me regarding VTP Server config on 3560E.I have configure multiple vlans on both the core swithces below is the example, my question is how will be my VTP server configuration on the 3560E since both the core switches will ha...

Cisco ATA192 pairing to BT Business Superhub2

I have recently purchase a Cisco ATA192 VoiP Telephone Adapter/SIP ATA w/ 2-FXS Ports to pair with my BT supplied Business Superhub2 (BT recommends this pairing) No success with pairing, and my PRT LED is Steady RED, if I press the PRT it changes to ...

nexus 7000 eem not runnig cli commands

Hi, I am tryning to run a python script from a eem to send an email and I notice that I am no capable of running any cli command from the eem.  eem example: event manager applet sendemail event cli match "conf t" action 0.5 cli command "enable" actio...

Nexus9000 guestshell iperf3 values issue

Hi All! I have one problem related to running GuestShell on Nexus 9000 I managed to successfully run guestshell and install iperf3. But when i start measuring channel bandwidth, it shows tiny values, the hundreds of kilobytes, while the real channel ...

Partner Launch Experience 2024