Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Contract End Dates to Populate w/Earliest End of Support Coverage.
by jchopp -
Ask the Experts リンク集: SRv6
by Megumi Kawabata -
Ask the Experts リンク集: SR-MPLS
by Megumi Kawabata -
Expressway - End-of-Life(EoL) とEnd-of-Sale(EoS) 情報
by Yusuke Yoshinaga -
Use two vpc peer-link in Cisco N9K
by johnlloyd_13 -
CSCvn31824 - %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet h
by Marco Monge Pascual -
FTD Route based VPN
by N3om -
Catalyst Center (DNA Center)：Pod アクセス手順
by Keito Kajiura
Community Activity
IE3300-8t2s Inter- Vlan Routing
Hi, I´m trying to enable intervlan routing between vlan 902 and vlan 903. I'm not sure that If the switch has the network-essentials license I can achieve this. I tried using "ip routing" command to enable ip routing but every time I try this I get t...
C9130AXI-B unable to get IP address from DHCP Server
Hello All,I cannot get C9130AXI-B Access Point to get IP addresses from DHCP Server.ConfigurationDHCP Server (dhcpserver.de) is on Win 11, connected to Cisco Catalyst C1200-8FP-2G PoE switchC9130AXI-B running EWC image v17.12.03 connected to the same...
VPN Anyconnect / syslog
Hello,Is it possible to retrieve the hostname of the client workstation via syslog messages?I activated syslog DAP, but I do not see the hostname of the workstation.For organizational reasons, I do not want to do it via AAA.Thanks a lot
Resolved! Cisco Routing - routes in routing table, no connectivity
I'm setting up a network (see image) and the issue I'm having is that I can see the redistributed routes in the routing table of R1 and R5, but I can't ping to them. When I try to ping 2.2.20.2 (R2) from R5 it's doesn't work, I can ping from R4. Sa...
CUBE - Using voice translation rules to block specific numbers
Hello!We are currently using a voice translation rule to reject calls from specific numbers at the CUBE level (see attached screenshot), but we have reached the maximum (100) and I haven't been able to stack multiple voice translation rules on the in...
Resolved! RIp not working
Hello! I am a student at college and i need some help with setup RIP.It is necessary that the network of the entire project be 197.10.19.0/24.Since I was constantly experiencing overlap when using it, I changed the subnet mask to 28.No matter how muc...
ASR BGP problem
the router looks fine and show ip bgp is correctR2 can't reach ISP by going to R1 to ISP*******************************************************************************************************R1no license smart enable!!spanning-tree extend system-id!i...
Cisco 9800-cl 802.1x radius authentication
Hello, I want to configure 802.1x authentication on an SSID on a 9800-CL hosted in Azure. I have configured the radius server, server group and method list and set this in the AAA section of the WLAN. In Wireshark I can see Access-Request coming from...
Video - ACI Virtualization
Grabación del webinar Community Live Integración de ACI con entorno VMware Video con nuestros expertos Armando Varret y Pablo Juárez. Esta presentación además de TAC Tips, incluye mejores prácticas y recomendaciones. Recuerde que puede enviarnos preg...
Migrating From Old 7600 to XR
Hi All,I am doing some testing for a migration from a 7604 MPLS PE with handoffs to a 7604 acting as an edge router. Each circuit on the PE router is just an untagged attachment circuit like this:interface GigabitEthernet2/8description MPLS Attachmen...
Unable to factory reset cisco 9300L switch to default settings.
Hello All,We are unable to reset our switch to the factory settings. Its a new switch out off the box that we configured (attempted to configure) and hosed it up. The factory default password isn't working user ID cisco and PW using the system SN. ...
LUA Script to modify contact header
Dear, I need to make a script to modify the contact header field,I need to remove the string "+ sip.instance =" <urn: uuid: 832028f41e6258c46e8de1e8dd3d6723360b5c74> "; reg-id = 1"String before normalizing:Contact: <sip: 3001@10.0.1.56: 50772>; + sip...
Is QoS needed at the Distribution layer (On two C9500K Stackwise)
Hello! I was wondering if I could get advice/input when it comes to QoS at the distribution layer of a network topology. Here's a high-level of our network topology.Soon to deploy two Cisco C9500k in a Stackwise HA configuration. It will have about 1...
AP Wi-Fi AIR-CAP3702I-R-K9, AIR-CAP3602I-R-K9
Hello everyone.Please tell me about two AP Wi-Fi AIR-CAP3702I-R-K9, AIR-CAP3602I-R-K9.I can't find information, how many users can work on Wi-Fi AP data without problems?At the moment, I had a maximum of 36 users connected to the AIR-CAP3602I-R-K9 an...
SOME DIAGNOSTIC COMANDS FOR MY NEW C4507
Hiiiiiiiii I have some new equipment, WS C4507R+E and i would like to have some diagnostic commands, hardware, software, CPU, even modules and supervisors, just to certify that everything is fine... Can someone helpme with some CLI comands plx?
