The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
I have a less then a dozen Cisco 3850 switches that I am working on. I need to configure 802.1x authentication. The issue is the switches are reaching out to Cisco ACS and I need to set up radius server to enable 802.1x. The Cisco ACS I found out ...
Hello all, Quick bit of background on this, the way our contact center currently works is that they have 1 line on their phones which they take both direct calls and calls via CSQ's. They have a few reports that they are using at the minute that incl...
Hi Joseph,I’m configuring our lab for testing on UCCE.I installed TSSOVA01 having IP address 192.168.204.20.I did a ping from TSS to CuCM 10.10.20.1 and I received packets.I did a ping from CuCM 10.10.20.1 using ssh to TSS and I didn’n receive any pa...
PID : N540-24Z8Q2C-M IOS-XR : 7.8.2 I want to know about smart licenses. The command is enable, but when I apply the command below, it behaves as if the license is off. RP/0/RP0/CPU0:PE-02#show run | inc licWed Mar 27 10:13:34.359 KSTBuilding confi...
9800-80 pair running 17.9.4a and APSP8 (upgraded about a month ago). Upon investigating after slowness/connection complaints from the professor of a 150-seat lecture hall where 9166s are installed, I realized that every single client in the room was ...
When is the appropriate times to use ' or " when creating message filters?Is ' used when you are adding in your own string of characters and " used for a system defined item like in the following example? header ("From") == 'example.com'
Greetings! Hope somebody can guide me how is it supposed to be done! Sorry, I'm a noob and seems to can't find an answer.Lets say I have 3 subnets/vlans/interfaces with security levels:inside (90)dmz (10)outside (0)lets say I want to allow http/https...
My FTD (FDM) running code 7.2.5.1-29 is getting the following message on the Smart License section: CONNECTION ISSUEFailed To Connect With License Server Lost connection for 0 days (Next Sync on 28 Mar 2024 11:06 PM). Please check and make sure the m...
O Cisco Engage Brasil é o evento que impulsionará seu crescimento profissional e pessoal por meio de sessões técnicas e de negócios, demonstrações de soluções da Cisco e de parceiros, bem como a oportunidade de interagir com executivos, parceiros de ...
I am looking at the following example in the admin guide:The remote-ip rule tests to see if the IP address of the host that sent that message matches a certain pattern.The IP address can be either Internet Protocol version 4 (IPv4) or Internet Protoc...
Hi,Per the title, I've got an issue with 5Ghz clients that have good signal strength because they are sat almost underneath the AP (1832 APs) yet but struggling to get more than 1Mbps throughput. I can see the channel utilisation is over 50% but zer...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: