Cisco Community

How Do I Speak to a 𝗗Elta rEpresentaTive Fast"? ✈#Contact US

헗헲헹혁헮 헔헶헿헹헶헻헲's phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ퟭ-ퟖퟖퟖ ✈ ퟖퟐퟗ ✈ 1316 // ퟭ-ퟖퟖퟖ ✈ ퟖퟐퟗ ✈ 1316 . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones ...

[𝗗elta Call] How Do I Speak to a 𝗗Elta rEpresentaTive Fast"?

헗헲헹혁헮 헔헶헿헹헶헻헲's phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ퟭ-ퟖퟖퟖ ✈ 8ퟐ9 ✈ 1316 // ퟭ-ퟖퟖퟖ ✈ 8ퟐ9 ✈ 1316 . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones tha...

CSCwi95574 - Answer botton In Jabra headset does not work with Jabber

As a work around and until Cisco resolves this, Jabber 14.1.1 for Macs works with Jabra headset Engage 75 and the headset can answer the call.

How Do I Talk to a 𝗗Elta rEpresentaTive Fast"? ✈#Contact US

헗헲헹혁헮 헔헶헿헹헶헻헲's phone number to call and talk with a live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 fast is ퟭ-ퟖퟖퟖ ✈ ퟖퟐퟗ ✈ 1316 // ퟭ-ퟖퟖퟖ ✈ ퟖퟐퟗ ✈ 1316 . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones ...

Cisco 1010 ports not coming back on after reboot

I'm new to this so please be kind Setting up a Cisco 1010 Firepower device, unboxed it, got it up and running, havent' did any config yet, so its all the defaults I would say. Needed to bring it to the office, once I turn it on, no port lights come ...

Where is the FTD/Anyconnect/Cisco secure client Compatibility matrix?

Hope you guys can help. I need to know if Anyconnect 4.10 is compatible with FTD versions 7.3 & 7.4? I am aware Anyconnect is no longer under support (as of 31/03/2024), We're in the process of upgrading our ASAs to FTDs and we need to know if we...

Protect Company WiFi from private hotspots with massive interference

We manage a large building with a spacious indoor area where optimizing channel distribution and adjusting transmission power for optimal coverage is quite intricate. Currently, all clients operate on the 5 GHz frequency.We've observed a significant ...

IP connectivity between Nexus and Palo Alto firewall

I'm struggling to understand connectivity problem between a switch and firewall. The Nexus is located between the Core switch and the edge firewall. It's purpose is to divert traffic via ITD for content filtering. My problem right now is that I'm n...

Cisco Archive config - any changes / Cisco commands

Hello Professionals,I have configured Archive to log config whenever type write memory.I would like to use this auto backup in other way too.Could anyone tell me how to configure followings?1. Is there possible to backup config whenever I make any ch...

notconnect vs notconnect:

Recently I've seen some switches show ports with a status of "notconnect:" What does the colon at the end signify?I don't have it documented where all I've seen it but I just now saw it on a 6 stack of WS-C3650-48PD running 16.12.06. About 85% of ou...

How Find Switch?

So, previously I had a static IP address I could point putty at that would SSH just fine. I verified the address in a Show Run form I copied two days ago, so I'm not crazy. The config was written to memory multiple times so it's not that.Today, after...

2 x 9800 L 17.94a and Prime 3.10 patch 4

Currently testing 9800 L, built 2, left one with a basic config so always have a guide and one with more config to match current 5520s before migration.Both 9800s are talking to prime, issue is one is one with more config now not updating AP details....

CDP Mismatch from CDP: Why?

Switch A, Cisco 9300, VTP mode transparentinterface GigabitEthernet1/0/5switchport access vlan 3switchport mode accessSwitch B, Cisco 3560, VTP mode transparentinterface GigabitEthernet1/0/1switchport access vlan 3switchport mode accessVlan 3 (L2) vl...

Automatic SNA reports exStealthwatch

Dear, I would like to ask if it is possible to make automatic reports in SNA. Currently we generate reports manually, but our client wants to automate them.There is the mentioned process, can you share information with me, I remain attentive thanks.

WLC 9800-CL - help with correct interface/SVI configuration

Hello all, we are currently transitioning to a virtual 9800-CL WLC, hosted on a VMWare node on premise. The WLC and the FlexConnect APs are working correctly but I am experiencing a weird behavior with the interfaces. The APs are on VLAN 1 - 192.168...

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Introducing Our New Gamification Ranking Naming

Community Activity