The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Good afternoon We have a problem after an unexpected hardware shutdown, now when logging into CUCM an error appears " WARNING: Ungraceful shutdown detected - A rebuild or upgrade of this node may be required to ensure no negative impact (such as con...
Our gateway mac address is different when we give arp -a in cmd the mac address is another show when we trace it shows a student mac what could be the problem?
Hello,Our FMC is logging an event 'VPN user Logoff' every two minutes for every user connected to the remote Access VPN. The users are not logging off, they are still connected and working fine.With many user connected to the VPN, this fills the logs...
Hello all,we are using 5520 wlc(8.10.190.0)and ap's in flex connect mode.currently we have migrated to capptive portal for the guest authentication.users are getting authenticated but they are not getting the ip address, in cisco ise the user is auth...
Hi我连接到公司VPN WEB界面,通过WEB界面下载了一个AnyConnect客户端,AnyConnect版本是:4.10.02086。首次安装到笔记本上是能够打开正常使用的,当把笔记本重启后再次打开AnyConnect客户端,就开始报错:The VPN Service is not available. Exiting.这个时候我得把这个客户端卸载,再次重新安装一遍才可以使用。
If I have Site A and Site B:Site A has Border switch that sending prefixes over eBGP peering and multiple eBGP peerings for separate VRFs to the Cisco Routers and that Cisco Router connected via dark fiber with Site B FW (lets say palo alto)What will...
Looking for any information on catalyst center integration with infoblox bloxone which is an cloud IPAM solution. Anyone have integrated Catalyst Center and Infoblox bloxone right now ? It seems that integration is only supported for on-prem Infoblox...
Hi everyone,I have 2 Aruba GWs and 2 L3 cisco switches with their respective VLANs and Network subnets.Both GWs are active and each cisco forwards traffic to it's respective GW.I want to achieve a dynamic traffic failover (ospf) if one of the GWs wou...
We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired.End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EMAre VG320-EM and VG320 are the same hardware and already...
When i get this switch from my client,they said not configure anything but refer from my picture here the command line show Failed to get config.txt.Normally after turn the switch it show at the cli the switch name or we can say hostname but it show ...
Hey community, I have a 3-tier architecture, with 4 VLANs 10-40, I configured inter-VLAN routing on distribution switches and it's working fine, however when I pursued to configure DAI on access and distribution switches inter-VLAN routing is not wor...
HiJust want to confirm the 3850 series switch model End of switch maintenance date.There is publication on the link below, but there's no date of switch maintenance, does it mean Cisco have not release yest?End-of-Sale and End-of-Life Announcement fo...
Dear Friends,I would like to know the best design and product (Cisco compatibility) for a hotline phone system. The hotline service should be available 24/7 and without downtime. I need around 150 phones to be installed inside the production factory....
hello Experts,Please help me regarding VTP Server config on 3560E.I have configure multiple vlans on both the core swithces below is the example, my question is how will be my VTP server configuration on the 3560E since both the core switches will ha...
hi,is it possible to configure two vpc peer-link (port-channel trunk) between two N9K?i.e. port-channel 1 would be a temporary trunk and uses MM fiber cable and port-channel 2 would be the 40GBASE-CR4 pre-fab direct cable.the 40GBASE-CR4 would arrive...