Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1919305members
1223484discussions

Community Activity

Is Lufthansa 𝗔irlines 24/7? {[Get One #24x7Support]}

How Can I Speak to a 퐋퐮퐟퐭퐡퐚퐧퐬퐚 Representative Fast? {{헗헶헿헲헰혁 헟헶헻헲 헧헼 헦혂헽헽헼헿혁}}To talk to a 퐋퐮퐟퐭퐡퐚퐧퐬퐚 헔헶헿헹헶헻헲 live representative in a quick time, you can initiate a request in several ways. You can call their dedicated customer service line at “ ퟏퟖퟎ...

Anyone help me with this topology

1. Make end to end connectivity first. 2. Block the network for these site   1)Make sure that Site 4 will not advirtise any network to Site 5 which it receiving from Site3 routers.  2) On site 5 , when we check routing table of R2 router,  it dont ha...

1111111111111111111111.png

URL Logs

So, I'm task with finding if anyone else search or connected to a specific URL in the last 30 days. Does any know if FMC have a way of searching this or generating a report. I have only found ways to create a rule to log it go forward not from the pa...

Pining between devices is not working

Hi, im having issues pining between devices, i also cannot figure out how to connect the D1 switch and R1 router. Password for secret is class and normal password is cisco. Would appreciate any help or guidance! thank you !!

jushb001 by Level 1
  • 49 Views
  • 0 replies
  • 0 Helpful votes

Not seeing debug dot1x or mab event log entries on IOS-XE machines.

Hello all,20+ years ago I used debug all the time, however not so much so in the last decade. Seems like last time I called TAC on the 3850 debug command they gave me some silly answer that debug was a Cisco TAC command.  WFIW All the Cisco.com debug...

wags by Level 1
  • 130 Views
  • 3 replies
  • 0 Helpful votes

how to modify TTL to less values at routers?

Assume that there are three router type devices outside firewall, and one core switch router behind one layer firewalland I would like to hide the router hop of core switch router from traceroute how to modify TTL to less values at router at the most...

Maivakov by Level 1
  • 120 Views
  • 4 replies
  • 0 Helpful votes

Resolved! Replacing spine by a different spine model

HELLO, i have cisco aci fabric with many pords, one of my pods are made by 2 x Cisco Nexus 9332C spines connecting 16 leaves with 4 uplinks for each leafs.I already used all the ports of the spines and i want to replace the 32 ports Cisco Nexus 9332C...

ANAKIN_TN by Level 1
  • 709 Views
  • 9 replies
  • 1 Helpful votes

What is the purpose of this equipment..Senior artists

A = cisco N9K-C9504This is a tool that was included in the equipment packaging box while mounting the equipment A. What is this tool used for? It looks like earwax, so my grandmother covets it. Please advise quickly. Thank you, mastersPlease understa...

seedmon by Level 1
  • 44 Views
  • 0 replies
  • 0 Helpful votes

Dhcp server with vlan's

Hello, I can't manage to give the connected PCs an ip through the dhcp server. My packet tracer + network design are attached. Have currently only started on the bottom part so it's only about the bottom PCs.Thanks in advance for the effort

TS40 by Level 1
  • 107 Views
  • 1 replies
  • 0 Helpful votes

VRF Leak Configuration

                                                                                         VRF Route LeakAs already we know that, Virtual Routing and Forwarding (VRF) is a technology for creating separate virtual routers on a single physical router. Ro...

Gopinath_Pigili_0-1711683498667.png Gopinath_Pigili_2-1711683525711.png Gopinath_Pigili_3-1711683877641.png Gopinath_Pigili_4-1711683925500.png

Ruckus 7150 to Cisco 3750 trunk port not working

I am trying to configure a trunk port on a Cisco 3750 that has fiber running to a ruckus 7150 switch.My current config connects the switches but it is only passing vlan1 traffic and I want multiple vlans. Therefore, I configured the port as a trunk o...

oowJ by Level 1
  • 166 Views
  • 4 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: