Cisco Community

Lock AnyConnect profile to specific certificate

I have multiple AnyConnect connection profiles for various remote users that provide access to different internal networks. The authentication method needs to be certificate only, but there doesn't seem to be a way to prevent an issued certificate ho...

Retorno ao escritório sem falhas : 11 Dicas para o Wi-Fi Perfeito !

Retorno ao Escritório Sem Falhas: Domine sua Rede Wi-Fi com 11 Estratégias Essenciais para Voz e Vídeo Perfeitos! (Meraki e Catalyst) À medida que as equipes retornam aos escritórios, a demanda por conexões Wi-Fi impecáveis para reuniões de voz e víd...

Allow Agent to respond to ping

Allow the cx cloud agent to respond to ping. Just basic reachability troubleshooting seems like a basic feature.

NERC CIP Compliance Support

Suggest addition of NERC Compliance to the Insight Compliance Reporting.

Cisco SPA502G keep rebooting themselves with System 4 Error

I have a customer who uses Cisco SPA502G phones, from 5 months ago in October 2023, they have been complaining that their phones have been rebooting themselves from time to time.The Reboot History under Info page shows that the Reboot Reason was Syst...

Reservation button is not visible

Can anyone see the reservation button in the new DevNet Sandbox interface?

Palo Alto to Firepower migration

Hey All,Anyone know of any tools to migrate config from Palo Alto to Firepower (or better yet, secure device manager)? Needing to migrate 5x physical appliances and 1x virtual rapidly.We need to migrate: DNS (DNS Proxy) DHCP NAT Security zones Interf...

Mounting catalyst switch port direction to the hot corridor. Ok or not

1Gb catalyst switches has air intake from front and side and exhaust to the back. And no versions with reverse-airflow.I know many places where such switches installed port side to the hot corridor - so it intake hot air and blow to direction of col...

Client roaming between APs at high traffic load cause 3 second gap

We are operating our vehicles remotely in the underground mines over Wi-Fi, the data load from the machine is constant around 30Mbit/s (yes, six to eight HD-cameras).When switching between APs we have noticed that we sometimes get a transmission gap ...

Which IPv6 address range is suitable for anycast addresses. list below

Which IPv6 address range is suitable for anycast addresses for distributed services such as DHCP or DNS?2001:db8:0234:ca3e::1/1282002:db84:3f30:ca84:be76:2/64The first one isn't a range. but people are saying that the second one is invalid. But why?

AP issue

Hello we have a local 9120axi AP with a 9800LC WLC that seems to be losing connection. The AP is in flex connect, all config looks fine: AdvancedCountry CodeUS Multiple CountriesUSStatistics Timer180CAPWAP MTU1485AP Link LatencyEnabledAP PMK Propaga...

C9800-80 in HA cannot install APSP6

Hello everyone,I'm trying to figure out a frustrating issue. Attempting an install of APSP6 keeps bombing out and I'm unsure what steps to take next. Software: Version 17.09.04aROM: 17.3(3r)Error in question: Dec 13 21:21:01 Eastern: %INSTALL-3-OPER...

Switch: Prompt 3650

Hi all, I have a 3650 stuck in the switch prompt. I've tried to set the IP address using the below commands so that I can upload the IOS, but I am unable to. set IP_ADDR Set DEFAULT_ROUTERbelow is the file system outputswitch: dirList of filesystems ...

Limit the number of concurrent logins to DNAC

Hello all, We have ISE with DNA Center merged. We have a requirement to limit/control the number of users that are allowed to login to DNAC at anyone time. Most Cisco devices can control this but is there a way to do this via ISE RADIUS/TACACS+? I ca...

Moquery to check unused EPGs

Hi All,We have 300+ EPGs in our Environment and some of them are not used.Is there a Moquery to list all the unused EPGs?

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Empowering Sustainability with Cisco and adidas

Community Activity