Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
VPN Any Connect
by pneal@cityofbrewton.org -
FTD performance Optimization
by Chess Norris -
Multicast - DR / forwarder election
by D@1984 -
350X firmware upgrade stack
by s464 -
SD-WAN Policy based routing (Route Policy)
by Hamidreza -
ISE 3.3 CLI login Failure
by james.tribble -
vManage (Manager) upgrade failing - cannot activate new image
by UnspokenDrop7 -
Refined Sunflower oil
by markjgalvan5
Community Activity
Resolved! Catalyst Center VM on Azure
Hello,Is there any version of Catalyt Center VM designed for Azure cloud?Is there any Cisco roadmap for this.If anyone can share any official cisco link with these information I'd appreciateThank you
cisco outdoor AP1542I not powering up
Greetings, Kindly advise how to check and rectify cisco outdoor AP1542I for not powering up. The WAPs are connected to 9200 series POE switch and the switch ports are able to power other devices when connected. End user found that 4 out of 18 instal...
Resolved! ISE 3.3 CLI login Failure
I have a ISE 3.3 server that I just updated to Patch2 and now I cannot login to the CLI. I ttakes my login and password and then just go back to the login screen, Tried rebooting the server.
CME12
Hello,I have CME12 installed on ISR4321, when I tried to register Cisco SIP 7841 it said unporoviend, when I searched I couldn't find my sip phone model in CME12, please check the belowRouter(config)#telephony-serviceRouter(config-telephony)#loadRout...
CSCwf36829 - IPv6 not supported on Nexus 3500's
Hello team. Currently I want to deploy ipv6 for some nexus 3500 devices and I have found that ipv6 is not supported for nexus 3500's (CSCwf36829 - IPv6 not supported on Nexus 3500's), however in the Bug Search Tool it only indicates it for version 9....
Deploying Duo for Windows Login to Multiple Devices
I am implementing Duo for Windows Login for the first time. I have successfully installed on several servers. This is working as expected.Question: Is it necessary to create a new Application for each server that is protected? Or can I "reuse" one Ap...
350X firmware upgrade stack
I have a pair of SX350X switches which are stacked and running our core network.Is it possible to do a firmware upgrade on these without any downtime?
UCS B200 M4 server wont entirely boot
upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...
C9800-80 in HA cannot install APSP6
Hello everyone,I'm trying to figure out a frustrating issue. Attempting an install of APSP6 keeps bombing out and I'm unsure what steps to take next. Software: Version 17.09.04aROM: 17.3(3r)Error in question: Dec 13 21:21:01 Eastern: %INSTALL-3-OPER...
SD-WAN Policy based routing (Route Policy)
Hi, I would like to create a PBR and apply it to an interface. I have created the route policy below and also a localized policy. I added the route policy to the localized policy and finally included the localized policy in a device template. However...
UCS API using Redfish to change Timezone
Hi together I try to configure the UCS timezone via the Redfish API, the only thing that I found so fare was: Changing "DateTimeLocalOffset", this works so far to change the utc / localtime. but not the correct timezone. Did anybody manage to set th...
C9130AXI-B unable to get IP address from DHCP Server
Hello All,I cannot get C9130AXI-B Access Point to get IP addresses from DHCP Server.ConfigurationDHCP Server (dhcpserver.de) is on Win 11, connected to Cisco Catalyst C1200-8FP-2G PoE switchC9130AXI-B running EWC image v17.12.03 connected to the same...
Anyconnect client login process stuck, when DAP is enabled
I have a brand new pair of Cisco FTD virtual running v7.4.1 code. When DAP is enabled with hostscan scanning look for Crowdstrike AV >= v5.0 and presence of Windows domain membership registry string, the Anyconnect client gets stuck at the "Please c...
VPN Any Connect
I am in the process of completing a remote connection with VPN Any connect. I am not understanding the Radius server. Do I config for use the server that the outside is connecting to.
AP not joining Controller
I have a Cisco 3700 Series AP and trying to connect it to a WLC 5508. I have getting a certificate validation failed error, however when I use the command "show crypto pki certificates" no such expired certificate shows up. Previously had an issue wi...
