Cisco Community

ACL for management access on AireOS and IOS

Our WLCs currently have management access (HTTP/S, SSH, SNMP, etc.) restricted to certain IPs/subnets via an ACL in the router upstream. Is there a way to accomplish this on the controllers themselves, both for AireOS (version 8.10) and IOS (version ...

Can I change the regulatory domain for our new CW9164I-ROW AP?

We have a 9800-CL Wireless Controller running 17.12.2. We just got a new CW9164I-ROW AP and its registered by the operational interfaces are down due to a regulatory domain error. Is there a way to change the regulatory domain for the access point?...

Computers disconnect continuously from WiFi when in office

Our Customer is facing issue on their corporate SSID , We have capture debug and found below logs . Can anyone suggest what can be issue , currently WLC is on IOS 8.5.171.0 and access points connected AIR-CAP3702I-Z-K9.Debug logs apfMsConnTask_3: Apr...

Telephony on cisco 4000 ISR

Hi TeamSince CCP was retired if I am to implement Telephony on the ISR 4000 series is there a replacement or will i have to do all configuration via CLI? thanks

NSO 6.2 Python API: Potential Bug in DataCallbacks register Method

Hello Cisco Community,I've encountered what appears to be a bug in the DataCallbacks class implementation, specifically within the register method that is responsible for ensuring a data handler implements required methods. I would appreciate some gu...

when was Rapid PVST+ introduced

I googled this and no answer. What year was it introduced? https://www.ciscopress.com/articles/article.asp?p=2832407&seqNum=5

Created a Route Based IPSEC Tunnel on Cisco FTD 2140

I have a Cisco FTD 2140 Secure Firewall that I am trying to build a route based IPSEC tunnel using VTI's. The vendor needs my proxy ID or encryption domain to be presented as a public IP address. So my WAN IP is obviously public but my internal netwo...

SD-WAN OMP Peering

In my environment I have 2 vSmart controllers. (vSmart-1, vSmart-2)In cEdge-1, the OMP peer is established only with vSmart-1. No details about peering with vSmart-2.in cEdge-2. the OMP peer is established with vSmart-1, for vSmart-2, the status is i...

IPSec VPN Tunnel Lan-to-Lan decrypt count zero

Hi, I have one issue with IPSec tunnel Lan-to-Lan between ASA 5525x (v9.8) and ASA FPR 2110 (v9.16). My Tunnel is up but ping between each client was not successful. Both peer status sh cry isakmp sa in "MM_ACTIVE".I ran packet-tracer icmp between pe...

Quiero desasociar mis certificaciones de una empresa

Hola Estimados Tengo una situacion Yo hice algunas certificaciones asociadas con una empresa y me gustaria saber como puedo cambiar o desasociar mis certificaciones de esa cuenta de correo y cambiarla para mi cuenta personal. GRacias de ante man...

End point detection

I am new to cisco endpoint and will need some help in creating rolling 3 months analysis for end point positive detectionsand also analysis for false positive detection.Any help and directions will be deeply appriciated.Thanks

Cisco ISE Guest Portal not loading on android phones only

Hi All, We have WLC9800 and Cisco ISE 3.3 . We have setup Guest WIFI with CWA on ISE. there is DACL(on ISE) and REDIRECT ACL(One WLC and ISE) has on been configured. All work perfectly for Windows and Iphone users. But for android user, the redirec...

Internal batteries

Does the Catalyst 2960-X or 350-P network switches have internal coin cell batteries to retain memory or clock settings? If so, what is the part number of this battery. Alternatively do you have a safety compliance document for the battery which allo...

Cisco ISE 3.2.0.542 External Identity Store Cert Auth via Proxy

We have implemented 802.1x with machine certificate authentication.The certificate validation is via OCSP and the question is does Cisco ISE support connection to OSCP via a Web Proxy? The assumption is that the connection would be using the system p...

フラグメント後に拒否されるはずの最初のパケットが拒否されない

2024年3月1日 (初版) TAC SR Collection主な問題フラグメントされたパケットを IP アドレスのみを指定し fragments キーワードを設定した access-list で deny しようとすると、最初のパケットのみ拒否されません。原因上記は実装動作です。詳細については下記ドキュメントにて記載されます。L3 情報だけで ACL 行が拒否され、fragments キーワードが存在する場合、パケットの L3 情報が ACL 行の L3 情報と一致すると、パケットのフ...

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Introducing Our New Gamification Ranking Naming

Community Activity