The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Delta 헔헶헿헹헶헻헲's phone number to call and talk with a live Representative fast is ퟏ-ퟴퟱퟱ✈ퟱퟮퟲ✈0515 // ퟏ-ퟴퟱퟱ✈ퟱퟮퟲ✈0515 . Select your connection language upon call and choose the IVR option that best suits your query by looking through the ones that are ge...
Hello,I have been tasked with ingesting Umbrella logs into our new SOC monitoring.During this onboarding process I was able to allow the SOC access to my S3 bucket for umbrella logs but noticed that only DNS logs are current.I have old IP & Proxy log...
Hello,Is it possible to retrieve the hostname of the client workstation via syslog messages?I activated syslog DAP, but I do not see the hostname of the workstation.For organizational reasons, I do not want to do it via AAA.Thanks a lot
Hello, I want to configure 802.1x authentication on an SSID on a 9800-CL hosted in Azure. I have configured the radius server, server group and method list and set this in the AAA section of the WLAN. In Wireshark I can see Access-Request coming from...
I am using vwlc in conjunction with Cisco AP 2702i. I've configured two SSIDs with MAC filtering authentication. Certain APs are displaying a 2.5g connection, while others show a 5g connection.What could be the problem
the router looks fine and show ip bgp is correctR2 can't reach ISP by going to R1 to ISP*******************************************************************************************************R1no license smart enable!!spanning-tree extend system-id!i...
Recently, my system bought around 800 of the Lenovo Gen 4 Chromebooks. We already had around 2500 Gen 3 100e's that worked perfectly fine, still do. We divided the new laptops out to the locations, and 2 of the 10 locations are having issues where th...
Hi folks,Running a Catalyst 9800-40 WLC. 1463 WAP's connected, predominantly C9136I WAP's. 8,817 active clients with 4,796 clients on our SSID using PEAP authentication via ISE on the back end. We are observing clients will frequently disconnect fro...
CUCM 14SU3, SBC 8300 v17.09.04a We moved off TDM PRIs over to new SBCs for all calling. Testing since November with no issues. We ported our DNs to the carrier on 17 April from our old carrier and I set up inbound calling to come in across the SIP ...
Hi community, I'm trying to collect DHCP packets from a Nexus 5500 and the problem I have is that the capture is interrupted randomly, so I nbeed to keep looking at the console to re-run it again, and some times it takes me some tries to get it worki...
I have a AP2802e and was wondering if i could connect 2 antennas (ANT2566P4W-R)on it , one using the normal connectors and the other would be connected using a DART connector(AIR-CAB002-DART-R). . Dart connectorAntenna ANT2566P4W-R
I have a couple of switches that are trunked via a LAN cable from another switch. I noticed that these switches sometimes have a hard time to SSH into. I get the error: "Connection timed out". After a while and a few tries I can connect just fine. I ...
Hello!We are currently using a voice translation rule to reject calls from specific numbers at the CUBE level (see attached screenshot), but we have reached the maximum (100) and I haven't been able to stack multiple voice translation rules on the in...
Hi to all.i have enabled in the second 40G slot of a 9407 with SUP1 a huawei 40G interface as in the png attached.The switch does not seem to have understood that. It rus 17.06.04.Chassis Type: C9407RMod Ports Card Type Model Serial No.---+-----+----...