Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1934820members
1256719discussions

Community Activity

Integrate AD in ISE and login to DNA Center with AD Account

Hello Community!Is there anyway that Active Directory should be integrated to ISE and AD User could login to DNA Center with the help of ISE?Because ISE is normally connected/integrated to DNAC and AD cannot be directly connected to DNAC. So how to l...

SR-TE

Hi @Harold Ritter ,I am sorry to ask questions on SR-TE. Whenever i observe any issue in Segment routing , only  your name comes to my mind as you helped me earlier on Segment routing related issue.  Thanks a lot for that.  Now i come up with differe...

mailatgk_0-1714020030784.png
mailatgk by Level 1
  • 175 Views
  • 2 replies
  • 0 Helpful votes

Transport Gateway error

I running into an issue with Catalyst SD-WAN went trying to push a simple template to a devices. I keep getting the following error no matter what I adjust in the system template: [7-May-2024 21:50:51 UTC] Configuring device with feature template: c8...

MPLS VPN VRF route selection

Hello Team, need your help to understand the route selection when we using MPLS and inside the MPLS there is OSPF protocol. I am getting confuse when doing traceroute from CE1 to CE2 another site and it is taking the path which i am not understanding...

Connection closed by foreign host

Work on a Mac for my lab exercise, I have followed all the instructions for an SSH connection, including configuring line VTY 0 4I have read all the posts on here and nothing seems to fix the error" connection closed by foreign host".     

BGP Path Selection

Hi Team,In this scenario, I have configured BGP and advertised a prefix on R4 using the network command. I was simply checking the BGP path selection criteria. In this case, I observed that the network prefix 172.16.1.0/24 is choosing the path via 12...

Traffic from sub-interface subnets failing to AWS

I have an ASR1001-x with a single 10G interface to a switch on the LAN. I cannot pass traffic from the sub interface subnets to AWS network connected on WAN. The Lan interface subnet 192.168.50.0/23 passes traffic correctly. the other two do not. Can...

jroy777 by Level 1
  • 105 Views
  • 2 replies
  • 0 Helpful votes

NDFC resource tab vlan range

Hi Experts, Im deploying NDFC for greenfield network. In resource tab its asking below, i don't know what this will be used for , should i keep it default value or I need to put some vlan and need to reserve it .* Network VLAN RangePer Switch Overlay...

请教一个话机背光显示设置的问题

公司门卫 CP-7945G话机每天晚上会亮,白天也不亮,保安晚上休息照眼睛,这个是在哪里设置的,我在话机上也没有找到,在WEB页面也没有找到设置的地方,请各位大佬指点一下,谢谢!

tony_tan by Spotlight
  • 106 Views
  • 1 replies
  • 0 Helpful votes

Change ISE DNS IP

Hi Guys,Is there any procedure on how to change ISE IP address? We just migrated the DNS server and need to update the settings on the ISE.What I know so far is that I suppose to change it via CLI. Our current setting is "ip name-server 192.168.0.10 ...

WAN Ports on Opposite Sides of a Circuit Go Down Simultaneously

Hello,I don't have a lot of experience with WAN routing, so this issue I am facing is perplexing. I have two WAN routers in two different geographical locations that are virtually connected via a tunnel. Recently we have been experiencing occasional ...

ts7575 by Level 1
  • 36 Views
  • 1 replies
  • 0 Helpful votes

MPLS label type unknown

hello, i have enable netflow in egress interface (mpls) in IOSXR 9922 cisco routerwe see there's MPLS label type "Unknown" in several prefixes /32 (IP loopback router)and i have check by perform this command "show mpls forwarding prefixes (iploopback...

fhh1 by Level 1
  • 32 Views
  • 0 replies
  • 0 Helpful votes