The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
To talk to a 헦헼혂혁헵현헲혀혁 헔헶헿헹헶헻헲혀 live 헿헲헽헿헲혀헲헻혁헮혁헶혃헲 in a quick time, you can initiate a request in several ways. You can call their dedicated customer service line at “ ퟭ-ퟴퟬퟱ✈ퟯퟬퟵ✈ퟵퟯퟳퟳ // ퟭ-ퟴퟬퟱ{헦헼혂혁헵현헲혀혁 헔헶헿헹헶헻헲혀}-ퟯퟬퟵ-ퟵퟯퟳퟳ (No Wait Time),” start a cha...
Main issue: The Webex Room Kit Mini is pulling an IP address, but the TelePresence Touch unit, which is connected to the Room Kit's dedicated Touch port (which I assume acts at least as a pass-through network port) is not (it's getting a 169.254.x.x...
Hi EveryoneI'm using a trial version of ASAv and i believe it has full functionality but is limited in 100kbps. I'm trying to set up remote access anyconnect vpn which authenticates to our NPS radius server. As you can see in the radius debug, it see...
Working on a stack of new Catalyst 9200L-24P-4G switches. This is the first time with this model and am beyond frustrated at this point as none of the documentation seems to work. Currently, all 4: Switch Ports Model SW Version SW...
Cisco Unified CM AdministrationSystem version: 12.5.1.13900-152Can anyone explain “last active” and “last registered” on call manager, Find and List Phones page?It’s my understanding that “last active” displays the timestamp when a device was last ac...
Hello world,I am working on creating a custom report based on the stock reports available for our call center. We would like to total the abandoned call for each day, sorted by the hour of the day. I cannot seem to create a report that only shows th...
Hello All, Cisco ISE: v2.0.0.306Switch: 3560 IP Phone: 7941G I have had many other 7941G IP Phones connected to this switch, which have all profiled/authenticated correctly. The only difference between those phones and this one, is that this phone...
Picked up an ISR 1100 2nd hand for the lab, Will it functionally work without smart licensing being activated or will it run on an eval licence? Being a while since i touched smart licensing but last time i used it Cisco weren't enforcing it.
After upgrading DNA Center to Catalyst Center I have trouble finding a decent abbreviation to use for dns entries and so on(3-4 letters)...DNA Center was dnac which was simple and unique enoughCCC (cisco catalyst center) is out because its a shoe bra...
Hi all,Thanks to some generosity from Cisco and from my university, I'm headed to Vegas for Cisco Live this year! I am very excited for the opportunity, but also a bit nervous considering my level of experience. I am only a freshman in college withou...
I have a trunk between cucm 6.1.5 and asterisk but when a call is made from cucm to asterisk it disconnects immediately it is picked (call from asterisk to cucm is ok). But it is working with cucm 10.5. I try route call from cucm 6.1.5 to 10.5 then c...
Hello, I built using the packet tracer a simple topology of three routers with ospf routing. I created a tunnel between the two routers that are not physically connected to each other, but I can't ping between one end and the other. I managed to ping...
Hi,Our old ISE C220M - SNS-3595-K9 is migreted to new one and I am trying to use it for labb by installning ESXI on the old ISE. But everytime i am trying to boot by usb, I got a messege "invalid signature detected - check secure policy boot in Setti...
Hi,on ISE 2.4 in the live logs pages the report that one got clicking on the repeat counter was very useful because the endpoints were sorted by repeat counters. So it was very easy to find the endpoints with high repeated counters.With ISE 3.2 the r...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: