Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1929534members
1244137discussions

Community Activity

wireless authentication

hello I am working in an environment where there is a wireless guest infrastructure configured  guest users are given access by an Administrator based on their email  there is  a requirement for a wireless printer to be given access to this guest net...

The operation took longer than expected.

I have just synchronized both Active Directory and Cisco ISE, ISE is using my server (AD) as an NTP server, everything is fine, but now I'm facing an issue "Status Summary: The operation took longer than expected. This may be caused by slow network c...

Jason2005 by Level 1
  • 242 Views
  • 13 replies
  • 0 Helpful votes

IPSEC VPN

Hello Team,I have below topology : -I have ipsec vpn from on-prem to aws cloud. the two endpoints  [192.168.40.10/32, 192.168.30.10/32] work fine as they are allowed on the encryption domain.I have users using remote vpn to connect to on-prem dc to a...

fmugambi_0-1714037714524.png
fmugambi by Spotlight
  • 71 Views
  • 12 replies
  • 0 Helpful votes

Expressway Single Domain 2 Seperate Expressways

Hi,We have a customer using HCS. As part of this we set up Expressway for them during the first lockdown for them to be able to use Jabber remotely for voice only (no IM&P). They use the same domain name internally and externally e.g. abc.com Another...

mikee2112 by Level 1
  • 413 Views
  • 1 replies
  • 0 Helpful votes

Catalyst 9000: NetFlow において Inactive flows がタイムアウトされない

2024年4月23日 (初版) TAC SR Collection主な問題 Catalyst 9000 シリーズの機器において uptime が一年以上になっている場合、 NetFlow においてInactive flows のキャッシュテーブルがタイムアウトされず、残り続ける可能性があります。 原因 この問題は CSCwa64171 として報告されております。 解決策 回避策:再起動によりタイムアウトされます。恒久対策:CSCwa64171 の不具合が修正されているバージョンをご利用くだ...

CISCO WSA upgrade alert error

We have upgraded our S1000v(wsa ) from 14.5.1 to 14.5.2 and upgrade was successful but when we checked the alerts we found an alerts as An application fault occurred: ('heimdall/svc.py send_command|195', "<class 'heimdall.exceptions.unknownprocess'="...

DK9 by Level 1
  • 93 Views
  • 6 replies
  • 0 Helpful votes

CMX - cmxadmin password recovery 11.0

I am following this document to recover and reset the password for "cmxadmin" https://www.cisco.com/c/en/us/td/docs/wireless/mse/11-0-1/cmx-config/b_cg_cmx1101/performing_administrative_tasks.html#id_131101 When I reset my VM Server and edit ("e") in...

cmx recovery image.PNG cmx password recovery instructions for CMX 11x.PNG

Duo Desktop not recognized

Hello, I am using Cisco Anyconnect to connect to VPN. The system is using Duo Desktop for device health. It is already installed, running and all the checks are ok. However, I am getting this error message and not able to proceed: Install Duo Desktop...

Sh2024 by Level 1
  • 109 Views
  • 4 replies
  • 0 Helpful votes

Multipod L3Out Preference

Hi All,I'm currently deploying ACI Multipod with two pods.I've configured a single VRF and single BGP L3Out that connects the leaf switches within each pod to our core network. This L3Out is then assigned to each BD which results in the the associate...

dm2020 by Level 1
  • 160 Views
  • 3 replies
  • 0 Helpful votes

cannot get to privileged enable mode via console

After searching through other posts, my config seems OK but still strange behaviourasa 9.20 running on FPWR chasisI cannot get in enabled mode when connecting to ASA via console.It used to work but stopped after I played (disable and restore) with aa...

kewwa by Level 1
  • 122 Views
  • 5 replies
  • 0 Helpful votes

Repeating syslog Message and then Crash

We're seeing a continuous string of the following messages on a 9407 running 17.9.5.  Eventually the switch crashes.  I can't find any info on what these messages mean exactly and whether we're looking at a software or hardware fault.  The supervisor...

Cisco Table Microphone Pro LAN connection?

I've went through the available documentation of the new Cisco Table Microphone Pro but I could not find if the microphone UTP/LAN cable can be connected to the same LAN of the Room codec or if it needs to be connected to the private LAN of the codec...

gfolens by Level 4
  • 61 Views
  • 1 replies
  • 0 Helpful votes

Anyconnect Linux aarch64 (arm64) version?

Hello,While there are linux x86_64 versions and Windows arm64 versions:https://cios.dhitechnical.com/Cisco_Firewall_ASA_FTD/Anyconnect%204.x/anyconnect-all-packages-4.10.08029-k9/are there any plans to release a linux aarch64 (arm64) version?This wou...

bpietras by Level 1
  • 27 Views
  • 1 replies
  • 0 Helpful votes