Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1929305members
1243585discussions

Community Activity

Travel# How do I speak to a Delta 𝗿epresentavive fast? USA

How do I get a human at 퐃퐞퐥퐭퐚 퐀퐢퐫퐥퐢퐧퐞퐬 immediately? Customer~Service 24*7Phone assistance: One of the quickest ways to speak with a 퐃퐞퐥퐭퐚 support agent is by callingퟏ-ퟖퟖퟖ-ퟴퟮퟵ-ퟏퟑퟏퟔ .//ퟏ-ퟖퟖퟖ-ퟴퟮퟵ-ퟏퟑퟏퟔ . The phone number for 퐃퐞퐥퐭퐚 assistance is listed on...

Travel#How can I speak to a Delta 𝗿𝗲𝗽𝗿𝗲𝘀𝗲𝗻𝘁𝗮𝘁𝗶𝘃 fast? USA

How do I get a human at 퐃퐞퐥퐭퐚 퐀퐢퐫퐥퐢퐧퐞퐬 immediately? Customer~Service 24*7Phone assistance: One of the quickest ways to speak with a 퐃퐞퐥퐭퐚 support agent is by callingퟏ-ퟖퟖퟖ-ퟴퟮퟵ-ퟏퟑퟏퟔ .//ퟏ-ퟖퟖퟖ-ퟴퟮퟵ-ퟏퟑퟏퟔ . The phone number for 퐃퐞퐥퐭퐚 assistance is listed on...

CUCM 11.5.1 SU2 upgrade

Hello Everyone, one of my clients currently have a CUCM cluster with 1 publisher and 6 subscribers, this cluster is running version 11.5.1 SU2. i am planning a refresh upgrade to version 14 using PCD. but before this upgrade, i am planning a minor up...

Cisco ISE 3.2 OVA instable crashes

Hi  Everyone,Cisco ISE 3.2 keeps crashing several days after the installation.The installation has been done successfully without any problems.After a couple of days the installation is malfunctioning.After several installations and change of the sel...

Tom -K by Level 1
  • 36 Views
  • 1 replies
  • 0 Helpful votes

Unable to create a building in DNA 2.3.5.5-70026

Hi,we have this fresh install of DNA Center 2.3.5.5-70026. I've been able to create areas using the Intent API but I can't create a building.sitePath = "/dna/intent/api/v1/site" headers = {'content-type': 'application/json'} headers["X-Auth-Token"] =...

Resolved! Cisco CM Switch Box

Our Forum Alert III Secondary Crash Net (SCN) is inoperable. I've heard the cisco cm could be configured to set up some devices to act as a ringdown, they called it a “Switch Box.” This would allow our Base Operations guys to have a work around from ...

Equivalent Command for 9800

A simple question....If I just knew where to find the answer:Doing MAC authentication on an 5520 WLC, I can see the MAC addresses accepted by the WLC if I issue the command:"sho macfilter summary"Can anyone tell me the equivalent command on a 9800 (y...

roo54 by Level 1
  • 103 Views
  • 5 replies
  • 0 Helpful votes