How to Speak at Someone on 𝗖𝗼𝗽𝗮 𝐀𝐢rlines?

Yes, 헖헼헽헮 퐀퐢퐫퐥퐢퐧퐞 customer support is available 24/7. Whether you have urgent inquiries or need assistance with your travel plans, you can reach out to their dedicated team at any time by calling ퟭ-ퟴퟬퟱ-ퟯퟬퟵ-ퟵퟯퟳퟳ (USA) or +ퟭ(ퟴퟬퟱ)-ퟯퟬퟵ-ퟵퟯퟳퟳ (USA)}. They ...

RIp not working

Hello! I am a student at college and i need some help with setup RIP.It is necessary that the network of the entire project be 197.10.19.0/24.Since I was constantly experiencing overlap when using it, I changed the subnet mask to 28.No matter how muc...

How Do I Connect With People on 𝗖𝗼𝗽𝗮 𝐀𝐢rlines?

Yes, 헖헼헽헮 퐀퐢퐫퐥퐢퐧퐞 customer support is available 24/7. Whether you have urgent inquiries or need assistance with your travel plans, you can reach out to their dedicated team at any time by calling ퟭ-ퟴퟬퟱ-ퟯퟬퟵ-ퟵퟯퟳퟳ (USA) or +ퟭ(ퟴퟬퟱ)-ퟯퟬퟵ-ퟵퟯퟳퟳ (USA)}. They ...

USA☎️How Do I Talk To A Live Person At Singapore Airl𝗶nes?

Travel ☎️How Do I Talk To A Live Person At Singapore Airl𝗶nes?USA

Phone assistance: One of the quickest ways to speak with a 퐒퐢퐧퐠퐚퐩퐨퐫퐞 support agent is by calling +ퟏ@ퟴ77//ퟓퟓퟗ///ퟎퟏퟔퟏ✈ .// +ퟏ@ퟴ77//ퟓퟓퟗ///ퟎퟏퟔퟏ✈ . The phone number for 퐒퐢퐧퐠퐚퐩퐨퐫퐞 assistance is listed on their official website. Simply call the number and f...

Travel ☎️How Do I Talk To A Live Person At Singapore Airl𝗶nes?

Phone assistance: One of the quickest ways to speak with a 퐒퐢퐧퐠퐚퐩퐨퐫퐞 support agent is by calling +ퟏ@ퟴ77//ퟓퟓퟗ///ퟎퟏퟔퟏ✈ .// +ퟏ@ퟴ77//ퟓퟓퟗ///ퟎퟏퟔퟏ✈ . The phone number for 퐒퐢퐧퐠퐚퐩퐨퐫퐞 assistance is listed on their official website. Simply call the number and f...

Identify the fans used in a Cisco Catalyst 9400 Series Switch

Hello.  This is my first time using the Cisco community, so hopefully I don't screw it up.  I'm trying to identify the specific fans used in a C9410R Cisco Catalyst Switch.  The vertical fan tray on the side pulls cooling flow through the lower part ...

PDART tool for migration

Dear Community,We're in the process of migrating from Cisco Prime Infrastructure Version 3.10.2 to DNAC Version 2.3.3.7. However, when running the PDART tool, it generates a report for Cisco Prime Infrastructure Version 3.10.0 and DNAC Version 2.3.5....

ACI L3out Pair Firewalls

Hey folks,I'm looking to set up an L3out with static routes for an Active/Standby Firewalls pair, as shown in the diagram below. However, I'm feeling a bit confused, especially when it comes to configuring the L3out with SVI. Any advice on how to pro...

MTU on subinterfaces

So normally a standard interface has an MTU of 1500.When creating a sub-interface on a router (or using an SVI on switch), should the MTU be manually lowered to 1496 to account for the extra 4 bytes?Everything just seems to work without this, so I am...

Where is a good source to learn what's new or different

Where is a good source to learn what's new or differences in software revisions?For example in CUCM or UCCXWe're on 12.5, what's new in the revisions for 12.514 is our next big step, where can I learn about what's included in 14 that's not in 12.5?

Cisco Routing - routes in routing table, no connectivity

I'm setting up a network (see image) and the issue I'm having is that I can see the redistributed routes in the routing table of R1 and R5, but I can't ping to them.  When I try to ping 2.2.20.2 (R2) from R5 it's doesn't work, I can ping from R4.  Sa...

How to register a 4506-E with Smart Licensing?

How do I register a 4500-E SUP-8 3.10.x or 3.11.x with smart licensing? I found the following command to change it to DNA Licensing, but I cannot find a command that works to register it. license right-to-use activate addon dna-advantage subscription...

Enable/Upgrade IKEv2 [ cisco ISR4451-X/K9 ]

Dear Experts!I have ISR4451-X/K9 & seemed there is no IKEv2 available.Can anyone guide me with steps to upgrade to ikev2?Thanks! 

Cisco Finesse "send error report"

Cisco Unified CCX AdministrationSystem version: 12.5.1.11001-348 (SU1-ES03)Where does one get access to view the error repot that get generated when you click on "send error report" with the Finesse web page?