The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Apr 16 04:14:35.390: %SW_MATM-4-MACFLAP_NOTIF: Host 001b.0907.fe0e in vlan 11 is flapping between port Gi1/1/1 and port Gi1/1/2Apr 16 04:14:35.390: %SW_MATM-4-MACFLAP_NOTIF: Host 001b.0907.fe0e in vlan 11 is flapping between port Gi1/1/1 and port Gi1...
Hello, I built using the packet tracer a simple topology of three routers with ospf routing. I created a tunnel between the two routers that are not physically connected to each other, but I can't ping between one end and the other. I managed to ping...
So I'd like to use ISE to authenticate then authorise a device based on an external CA presented during 802.1x. I'd also like ISE to use an OCSP check for the validity of this cert.What are the steps to get this to work? Do i need to import the root ...
I'm involved in the following setup illustrated below. I am Site 4. I have a SIP trunk via the CUBE to Site 1. Calls route between Site 4 and Site 1 with no problem. Is it possible to use Site 1 CUCM, to route calls from Site 4 to Sites 3 or 2? Is it...
Hi I got a pair of 5520 in SSO mode version 8.10.190. If you want to run OEAP then you need to enable Enable NAT Address on the management interface. The problem is that the "Enable NAT Address" is greyed out: the question is: is it possible to enab...
Greetings,I'm checking the "show bgp x.x.x.x" output in 3 different XR routers A, B & C in an ISP environment.Here's an example as the best path part of the output:Path #1: Received by speaker 0 Advertised IPv4 Unicast paths to peers (in unique updat...
When we try to access to the CLI with Putty or other tool, after putting the credentials the next message shows up: *****PID file exists. But Adminshell service is not completely up.**********If adminshell is restarted manually, please wait for 15-20...
Hello Everyone,I work in a data center and we have two L3 Nexus 9k cores with 40g ports, then we have ~10 cabinets with 2 top-of-the-rack switches connected directly to the cores. Each TOR has connections for servers, ISP/MPLS routers, etc.I am tryin...
Hello , Cisco FPR version 7.2.5 is possible make group lock for local user that connect to local network over AnyConnect. I want to make Anyconnect access in our network where we have more group policy, we can not find that we can lock local user fo...
Hello everyone,Can you provide me with the eventid of the VPN failed logon on Cisco's devices?I couldn't find any examples and i wan't to create a brute force rule for it in my SIEM solutions.
I'm having problems setting up my home network using Cisco2921 for the first time. It has the basic licenses only. Below is the running config followed by my adapter settings. Any assistance would be greatly appreciated. Thank you.Current configurati...
Working on a pair of 2130s in HA that have the URL filtering license and there is also an SSL Policy in place. YouTube isn't blocked, but there is 1 particular video that when trying to view it you get the following error: The same URL when on a co...
I am looking to pass a variable from the STORE Data Provider as part of an iFrame URL. For example:"widgets": {"comp1": {"attributes": {"src": "https://test/{$STORE.agent.agentId}"},"comp": "agentx-wc-iframe"}}The value is not being passed, rather th...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: