The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Is possible for the Cisco CUBE to send some kind of notification or alert whenever it receives a call from PSTN for certain numbers?ex. external caller dialed 555-222-1111 from PSTN-> CUBE->CUCMThanks
Hello. I need to order two GLC-SX-MM Compatible SFP Module's that are compatible with 9200L and 2960X switches.One of the two will connect to a Cisco 2960X 24 port PoE switch the other will connected to a 9200L PoE 48 port switch.Can someone link me...
This is a fixed port router with a mix of SFP+, SFP28, QSFP28 and QSFP-DD ports The install guide says they are split between slice 0 and slice 1 with 24 ports per slice How does this translate into the rack/slot/instance/port schema ? is the slice ...
Hi,can someone please advise why I need line 4 of below Acl? I understand we use established when we want to allow the response to the connection initiated from the internal network but on line 3 we allow ssh from any source to any destination alread...
Set person being visited from a pull-down list of usersSet person being visited from a list of department and usersStatically Assign an Email Address for the Sponsor This document shows you how to enable your guests to choose from a list of sponsor...
Is there a way to automatically stop sharing PC or laptop input after people leave the meeting. The system will not go into standby when pc or laptop is shared and room scheduler is lit up red as the room is being used. Is there some kind of macro ...
HiCould someone verify if the topology (attached) is feasible? It involves sharing the same OSPF area 6 among multiple Backbone Routers. I'm trying to determine if I can evaluate the topology to ensure that each Backbone router has the exact same LSD...
We had one of our HDD fail and now the device won't boot at all. We can get into IMM and we are also able to use KVM to view the BIOS boot up and menu system. I've tried to boot off USB, CD ROM, and the other HDD but I cannot get this device to boo...
Hello All As known from Cisco documents, total size of the buffer used to store the "ECC variables" internally is 2000 bytes. Is there any constraint similar for User Variables? Did some googling and found this one from the link belowhttps://supportf...
New features, enhancements, and other improvementsNow in public preview: Duo Mobile with time-based one-time passcodes (TOTP)Now in public preview: Require user verification with PIN or biometric for WebAuthn roaming authenticatorsNow in public previ...
Hi I am deploying over 900 FTD 1120 to Cisco CDO and cdFMC, doing the configuration of the device inside the cdFMC i am applying a health policy, platform settings and add the device to a device group. To my understanding of the API, you need to sp...
Hi colleagues, I have the following issue, I'm migrating from cisco ASA5510 to FRP1010e managed via FDM. The configuration is simple and I moved it to the new device(FRP1010e). I have configured one interface for OUTSIDE with public address and VLAN ...
All,My client is having major issues after migrating from CUCM 10 to Cisco Webex Control hub. We have 14 fax lines connected to AudioCode MP-124E. We are having issues with receiving partial faxes, say 1 page of 6, etc. I had a ticket open with Ci...
We’re excited to share that Splunk is now part of Cisco, enabling our customers to use their data in more powerful ways. Cisco + Splunk: Learn more. Just added: Executive Roundtable on the Future of Cisco and Splunk webinar on April 4th, 2024 | 10 AM...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: