The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hello everyone,We would like to use our “old” C2960X devices, which we have in large numbers, to connect simple devices such as printers or PCs that do not require PoE. The goal is to use SGT for these devices. I have already read that it is not poss...
Please share the warranty status of the below switches:PSZ27351CMMPSZ27351ADCPSZ27351AU1PSZ27351CCHPSZ27351ASWPSZ273519EGPSZ27351CJUPSZ27351BR2PSZ27351CQMPSZ27351CLZ
Hello,I have cucm running under vmware using cisco ucsc-c240-m4s2.Current cucm version is 11 and nowi want to upgrade to version 12.When i try to order smartnet for ucsc-c240-m4s2 our distributor say this box already eol and eos. So here i need advic...
We had deployed a cisco ISR 4431 / K9 Router at a customer place and it has gone under ZORO, we had paid the amount for its removal on 27th April 2024 and till date no revert or information has been received by us on this regardThe device Serial Numb...
We are designing new lab with 100G network Cisco at core level and Dell Switches having either 100G or 40G uplinks at TOR level. And, want to check if Cisco QSFP 40/100 Gb dual-rate BiDi transceiver "QSFP-40/100-SRBD=100G and 40GBASE SR-BiDi QSFP T...
I found an anomaly in the SG350 device regarding the cpu utilization is always high, while the traffic increase only happens temporarily. Can I get an official statement regarding this?
Hello Community!Is there anyway that Active Directory should be integrated to ISE and AD User could login to DNA Center with the help of ISE?Because ISE is normally connected/integrated to DNAC and AD cannot be directly connected to DNAC. So how to l...
Hi I have an access control rule that permits traffic from server to another server via tcp/5000 and an intrusion policy is applied to this rule.there is one intrusion rule hitting where the rule definition has in the destination ports different port...
Hello everyone, is it possible to generate a report or something that says how many minutes during the month or last 3 months, a FTD was out? For example, if I go to "Monitor-statistics" I can see the uptime of the device, that is, how long it has b...
I enabled SNR on a users line. Works fine.Customer does not like that other phones show the option under CME Services URL>My Phone APPS> Single Number Reach, even when the phone line is not programmed to allow SNR. Is the SNR option something that ...
I need to upgrade vFMC to 7.2.5 version but at this moment i don't want to upgrade my FTD to new version , my FTDs are at version 7.2.4 , will FMC be ok managing lower version of FTD? Thanks
This is the command i type: r2(config)#Track 1 int g0/0/0 line-protocol and it gives me an invalid input at the track part. is there a different configuration mode I need to be in or is it unsupported? I tried this on both 4000 series routers and a 2...
Hi, I found a workaround in a FDM-V. This is a example > configure network management-interface enable eth0 firstboot and FTDonbox, setting internal route at /usr/local/sf/lib/perl/5.24.4/SF/NetworkConf/NetworkSettings.pm line 1198.Configuration upda...
Hi TeamNeed help with files uploaded to cisco ise repository. All settings related to FTP and file permission done but yet couldn't access files in the repository. See below error message: XP-ISE-02/admin(config)# repository ftp-repoXP-ISE-02/admin(c...