Cisco Community

CUCM 11.5 License bin file error upload

Hey. I got CUCM 11.5 License bin file. But cannot upload license to CUCM portal

We want to utilise the 4 ports on the Cisco C9800-L-F-K9 to connect AP

We want to utilise the 4 ports on the Cisco C9800-L-F-K9 to connect APs - and SVI interface on the WLC have been created on trunk TenGigabitEthernet0/1/0 with wlan 5 and 100 and - access port vlan 5 on TwoGigabitEthernet0/0/0 should these two/4 ports...

Joining ISE to a Reversed DNS Zone

I have joined ISE on the same reversed zone as 50.168.192.in-addr.arpa (ise1.srvcore.local), but ISE have an address of 192.168.99.35.ISE could resolve and ping DNS domaine names on Windows Server and could PING its name "ise1.srvcore.local" and can ...

Route Based VPN FTD

HIWe have several Policy based VPNs, I have read in a Cisco document that the sysopt permit-vpn is not supported with Route based VPN and I will need to configure access control for this, so that being said does this affect our policy based VPNs whic...

Fix empty startup-config for C9200L

For Cisco WS-C9200L-24T-4G-E, a user tried to backup configuration from Web portal. But did wrongly that uploaded empty text file to the device.That is:Copy to devicetftpaaa.txt (created from local computer)startup-configupload to device.Now the star...

セキュアエンドポイントでUmbrellaの機能であるWEBフィルタが統合又は機能追加する予定はないでしょうか

セキュアエンドポイントでWEBフィルタ機能があると非常に運用しやすくなり、それ以外にもメリットがあると思われます。セキュアエンドポイントのロードマップでその様な検討若しくは機能追加の予定はあるでしょうか？

Eliminé una grabación definitivamente creyendo que se había descargado

Hola, ayer vacié la papelera de grabaciones para dejar espacio libre, creyendo que estaban correctamente descargadas, y hoy me he dado cuenta que me falta una de ellas. ¿Es posible recuperarla todavía? No sé si Webex las almacena por un tiempo despué...

cant wr or copy run start

hi all,before on this switch (nexus 7000) i could do a "wr" or "copy run start" no problem but now i get thiswr[########################################] 100%Configuration update aborted: request was abortedthanks,rob

The operation took longer than expected.

I have just synchronized both Active Directory and Cisco ISE, ISE is using my server (AD) as an NTP server, everything is fine, but now I'm facing an issue "Status Summary: The operation took longer than expected. This may be caused by slow network c...

Service impact on ISE certificate renewal

Hello. I'm trying to renew the ISE's certificate, but I'm using both admin and eap authentication, portal, and radius DTLS. In this case, I would like to know if renewing this certificate will reboot the ISE or if it will cause downtime. The certific...

Does XDR replace SIEM and SOAR?

Extended Detection and Response (XDR) - Versus - Security information and event management (SIEM). After the acquisition of Splunk as a SIEM and the launch of Cisco XDR, which one is better for detection and response?

Forward traffic from subnet to another on C3750

hi guys thanks for your suggestions in advancehere is my lab setup sorry for the primitive drawing(TYPO in CT2 Bib1/0/12 it is actually 123.123.123.242/30)i modified ips to fake ones. 10.0.22.1/24 is one of our vlans that has full internet access.CT1...

Cisco Switch Web UI with HTTPS (lock icon)?

Hello, has anyone successfully implemented HTTPS on their switch web management UI? I would like to get rid of the warning when I access the web UI, but I cannot seem to find resources about it online.I am currently using a Catalyst 9300 in my networ...

uccx partial service

my cisco uccx is showing partial service

Increase TX buffer size exanic x25

I have a exanic x25 I wanted to know how and from where can we increase this size of the tx buffer. Any help or suggestio?

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Empowering Sustainability with Cisco and adidas

Community Activity