The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
HiJust want to confirm the 3850 series switch model End of switch maintenance date.There is publication on the link below, but there's no date of switch maintenance, does it mean Cisco have not release yest?End-of-Sale and End-of-Life Announcement fo...
Dear Friends,I would like to know the best design and product (Cisco compatibility) for a hotline phone system. The hotline service should be available 24/7 and without downtime. I need around 150 phones to be installed inside the production factory....
hello Experts,Please help me regarding VTP Server config on 3560E.I have configure multiple vlans on both the core swithces below is the example, my question is how will be my VTP server configuration on the 3560E since both the core switches will ha...
hi,is it possible to configure two vpc peer-link (port-channel trunk) between two N9K?i.e. port-channel 1 would be a temporary trunk and uses MM fiber cable and port-channel 2 would be the 40GBASE-CR4 pre-fab direct cable.the 40GBASE-CR4 would arrive...
i can't ping the l1:10.1.1.1 from source 20.1.1.1 router R4 router and mbgp is configure between R1 and R2 router without mpls enable. rip of vrf is redistribute in mbgp and mbgp is redistribute in rip R1 router configurationip vrf A rd 1:1 route-ta...
Hi,I am not able to find the command to set the input rate average calculation on the interface.I used the command once, but I have lost the reference to the documentation.Can anyone help me?I need to monitor the output in the interface for a period ...
Hi guys,Im trying to simulate a switch in Gns3 and i use 16ESW module in a cisco 3700 router.Can you please tell why im getting this record after i try to filter which vlans pass through my trunk port:Router(config-if)#switchport trunk allowed vlan 2...
Hello. Do I still need an Named User license for our Cisco Board 75 and Cisco Room Kit if I use Webex as our collaboration platform? or a device registration license is all I need?
Good day to all!I'm currently facing a severe problem in ongoing hotel project. initial designer has designed the building allocating one Access Point for each apartment. But certain apartments available that are larger than others. An AP does not su...
Good afternoon We have a problem after an unexpected hardware shutdown, now when logging into CUCM an error appears " WARNING: Ungraceful shutdown detected - A rebuild or upgrade of this node may be required to ensure no negative impact (such as con...
Important Notes: As such, the COP file should beinstalled via the CLI, not the GUI. We use the Cisco Unified Operating System Administration Web page (GUI). The current update status remains at software upgrade status. Is there a way to stop it or f...
Hi, My Cisco RV260 router stopped booting from the bouth internal image files. I would like to create a USB boot drive with the original firmware (RV16X_26X-v1.0.01.10-2022-09-12-06-56-24-AM.img) , but I have no idea how to name the img file for USB ...
Hi there, I am upgrading a bunch of WLCs at different sites from 17.9.4a to 17.9.5.I am performing the upgrade using GUI (browser) with ISSU Upgrade tickbox ticked (AP upgrade per iteration set to 5% to minimise disruption).Problem is, 2 of the sites...
We recently moved to a SIP trunk and inbound/outbound calls worked just fine, but DTMF is not functioning for SCCP phones. When a call is made and we get an auto-attendant (using a SCCP phone), when selecting an option, the selected option is not reg...
Hello , Following Bug CSCwd64245 I Try to Install in CUCM patch : ciscocm.v1_java_deserial-CSCwd64245.cop.sha512 But I got error :"The selected file is not valid.please ensure that cop\ISO isintended for this release " My version is 12.5.1.12900 any...