Cisco Community

ASA <-> Fortigate IPSec VTI Issue

Hello, I am currently testing the IPSec Ikev2 VTI Based (routed-based) interworking of FPR2110 and 3rd party equipment (Fortigate) running ASA OS 9.18(3)56 as shown in the picture above.I understand that in the process of creating a Tunnel interface...

SG350 - intermittently drops one VLAN link

We have an SG350-28P as the core switch at one of our sites and intermittently, users connected to VLAN 7 (192.168.9.0/24) advise that they lose internet access. At the time of the issue, the switch cannot ping the router (Cisco 887VA, 10.1.9.1, VLAN...

Network with two uplink

Hello everyone,Here i have two uplink from my main core switch which is connected to Main-R.i would like to utilize both uplink same time for different network Eg:MGMT network use Service Provider as a Uplink (192.168.3.2)DATA network use Main-R as a...

NAT for ping ICMP from outside to inside via ASAv

Hi, I am 4-year student to university of since from Vietnam. I have a problem about ping ICMP through ASA. I can ping from R2 from outside to 4.0.0.1 of DMZ or 8.0.0.1 of inside. I can ping from DMZ via inside. Can also ping from DMZ and inside to go...

CISCO 8540 WLC licenses

Noticed that the license is evaluation instead of perpetual? If we bought new AP, do we still need to buy licenses?Cisco wireless controller 8540Software version 8.2.151.0

cisco macsec between my head office and branch offices

cisco 9500 layer 3 switch in the head office and C3560CX switches in 5 branch offices. ISP gives an interface to the head office, both data vlan and internet vlan. I want to establish macsec between the branches.can anyone support me in macsec setup?

CSCwf36829 - IPv6 not supported on Nexus 3500's

Hello team. Currently I want to deploy ipv6 for some nexus 3500 devices and I have found that ipv6 is not supported for nexus 3500's (CSCwf36829 - IPv6 not supported on Nexus 3500's), however in the Bug Search Tool it only indicates it for version 9....

Nexus 5500 ethanalizer interrupts

Hi community, I'm trying to collect DHCP packets from a Nexus 5500 and the problem I have is that the capture is interrupted randomly, so I nbeed to keep looking at the console to re-run it again, and some times it takes me some tries to get it worki...

I don't understand how TACACS Profiles works.

If you look at the tacacs profile as shown in the picture, there are custom characteristics I wonder how this works. In the case of other banders, I understand that tacacs are linked using these attributes If you add a value here, compare it with the...

This is happening on my cisco switch 9300

Hi Members, This is happening on my Cisco switch, and I have no idea why this is happening. Anybody had the same issue? If so, how did you all fix this, please? Your help suggestion and idea would be highly appreciated. May 1 23:25:19.000: %LI...

C9300L-24T-E machine version 17.3 default padding settings

I am using the C9300L-24T-E machine version 17.3 and was wondering what the padding default settings are?

思科无线 AP 注册不了的问题

无线AP 思科 AIR-AP-1832I-H-K9 无线控制器思科 2504 只是想测试一下AP的覆盖范围，因为没有三层交换机用了个家用的路由器给提供 DHCP 服务问题：AP能获取到地址但是注册不了显示 not joined 日志是怎样的，看不明白，哪位大大给解释一下到底是什么原因*spamApTask6: Apr 02 15:08:57.103: #DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:818 Failed ...

CAPWAP do not convert to EWC

Hello,We have Catalyst 9100AX series APs. We want to convert one of them to EWC. We tried to factoy reset both however after the reset they are still act like CAPWAP and stuck at CAPWAP States.P.S. We have WLCs in our network but we isolated the VLA...

Cisco CBS Switch Latest Firmware Availability

Dear Cisco Community,This is regarding availability of latest firmware for below-listed Cisco CBS Segment Switches. Basically, I'm performing Manual Network Audit where I need to provide a list of latest firmware(s) with date & time stamp of release ...

Hotline phone service to be available 24/365

Dear Friends,I would like to know the best design and product (Cisco compatibility) for a hotline phone system. The hotline service should be available 24/7 and without downtime. I need around 150 phones to be installed inside the production factory....

Congratulations to the Event Top Contributors Class of 2024!

April Community Updates

Introducing Our New Gamification Ranking Naming

Community Activity